Sony FD Trinitron WEGA KV-32FS120 32" TV Logo

Related Topics:

Cheryl Floyd Posted on Apr 19, 2014

Fd trinitron xbr kv40xbr700 is blinking four times but will not turn on

5 Related Answers

Anonymous

  • 3 Answers
  • Posted on Sep 23, 2007

SOURCE: Sony FD Trinitron WEGA KV 32FS120

This model does not have a G board. I will post when I have this solved.

Ad

Anonymous

  • 4234 Answers
  • Posted on May 23, 2008

SOURCE: fd trinitron wega kv-32fs120

This is a problem with the regulator circuit. If you are comfortable with soldfering, you should be able to repair this yourself. I'll look up the specific parts that require replacement.
Dan

mortworker

  • 1 Answer
  • Posted on Jun 15, 2008

SOURCE: Sony FD Trinitron WEGA KV-36HS500 blinking red light 6 times

My Sony KV36HS500 Trinitron is doing the same thing. Last night the next street over was hit by lightning. The "7" blink pattern was happening, so like the manual stated, unplug it for 4 hours. Which I did. The t.v. is back up and running fine. It's a nice t.v., better than the plasma I paid over a grand for, that's already shot. It's a good t.v. and good that Sony put in the stand by protection to prevent the t.v. from dying an unnecessary young death. Patience, don't rush it, unplug the t.v. and leave it sit. Also, don't use a power strip, that was my mistake, and unplug your t.v. if storms are in the area, I was too lazy to and now I had to deal with this, in 8 years, only twice did this happen. I'd buy another one tomorrow if they still made them.

cathim

  • 1 Answer
  • Posted on Dec 01, 2008

SOURCE: Sony FD Trinitron WEGA Standby Light Blinks, TV Does Not Turn On

Sony FD Trinition Wega KV-32HS510 Try to turn tv on -it starts then shuts off -stand by lights keeps flashing. Memory stick light flashes then goes off.

Anonymous

  • 563 Answers
  • Posted on Jul 11, 2009

SOURCE: Sony FD Trinitron WEGA KV-32HS500...red standby light blinks 6 ti

I have over 10 years experience in electronic tech support.

I know this isn't what you want to hear, but the problem you've described can't be fixed with
troubleshooting. Your TV will have to be repaired. There is a part that has developed a defect and needs to be replaced. If you're still in warranty, the TV will be repaired at no charge to you. The warranty would likely be at least one year from the date of purchase from the manufacturer. If you purchased an extended service plan they will repair the TV at no charge as well.

If the TV is no longer in warranty, it will likely cost a minimum of $150 parts and labor. This is assuming that you only need one
circuit board or small part. If the problem is more than one of the circuit boards, the price of repair could go much higher.

I hope I've provided you useful assistance and that this information allows you to make an informed decision as to how to proceed from here. Please be sure to vote on my response. I hope I've earned a good rating from you today.

Please let me know if I can be of further assistance.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

I have a tv Sony Trinitron XBR. It does not turn on; the LED red light blinks 7 times.

Common problem on those. It has deflection stopped. I.C. on deflection board. Need shop to repair.
7helpful
1answer

MY sony trinitron XBR TV does not stay on.

what's wrong with my Sony trinitron XBR tv's timer
2helpful
1answer

I have the Sony XBR 40in Trinitron and it won't

sounds like you have some cold solder or bad joints,power section, inspect it ,with the back off, but be carefull.........i had one that did that...bad connection in solder joint...had to resolder,if you have to resolder,make sure it is unpluged.hope this helped....
3helpful
1answer

Sony trinitron xbr (9 years old) failing to power up

Turn it off u leave on to long ur CRT Tube will dies soner.Resolder the FBT,the flyback transformer, the big block of plastic with a red wire with a cap hook to the and the transistor beside it.This transformer is the HV to the CRT to get power.
3helpful
2answers

Standby lighy blinks tv won't turn on

error code 4 is vertical deflecton failure . replace the vertical deflection ic. and the electrolytic capacitors in the vertical circuit. Or if you are lucky just resolder the vetical IC and resolder th horizontal section too.
0helpful
1answer
1helpful
1answer

Trinitron XBR Try to turn on but light just

Look for the service manual, it contains the explanation of the flashing light codes, it will tell you what part is faulty.
0helpful
3answers

Sony FD Trinitron WEGA KV 32FS120

Hiii...
I'm not certainly sure how many time the led blinking ?

I hope hear from tou soon...

Thank's

[Vrya]
[email protected]
0helpful
1answer

SONY 36 XBR SOUND BUT NO PICTURE

posible solution is adjust the screen to low.also check the trimer if it is working.check the resistor in the heater line...weng
Not finding what you are looking for?

51 views

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

matt martin
matt martin

Level 3 Expert

1259 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...