Motel tv mode wehats the code - Polaroid 4226TLMB 42 in. LCD TV

have motel replace tv

1st I hope the motel is giving you a discount for a room with no tv , second an educated guess would be that your tv is non digital and is set to receive an antenna signal , along about three years ago most all cable systems went to a digital system , this required a down converter for the older TV's to still be able to work on higher channels but some systems still sent 2-13 out on the wire for the older sets as well , essentially the converter takes a hi res digital signal and changes it to a fuzzy/blurry analog signal for the old tv's , silly as it sounds , there's millions of em working everyday in America that way

Go up on Visio's web site. They can tell you what the steps are to get to the special setup screen on the TV.

Model No TC_21s15m circuit diagram image

people stop stealing motel tv's!!!!

Special TV's made for that purpose are manufactured that way. There is no converting them. Give it back.

give it back. motels don't sell tv's.

Each make of television has their own way of accessing the service menu to disable the hotel/motel mode.

You can get your Panasonic Tv out of hotel mode with the Regular remote control you got with them.

Please follow the steps below.

Press and hold the V/- button on the tv itself.
while you are holding this button down, with the Panasonic remote you got with them press the AV button 3 times.

This will bring up a hidden Installer Menu this is where you can take off the HOTEL MODE. and set up your owe setting.

While you are in this mode, be very care you are not switching things off that you are not sure what they are. as this may put a spanner in the works

Hope you get this all sorted out.

Little Dish Fitter

Please leave a thumbs up if this sorts you out....

First off. What kind of RCA remote. and second 1.Turn on the TV 2. Press and hold the TV button 3. Enter the 4 digit code *1004,1048,1049,1050,1080,1107,1108,1162,1169,1180
4. Press the on off button (may need to press twice) 5. if nothing works try entering another code.
Note: your remote may only need a 3 number code. but most require 4