Canon imageRUNNER 2270 Copier Logo

Related Topics:

A
Anonymous Posted on Apr 18, 2014

Please help solve my problem with my ir2270 for not recognising toner

2 Related Answers

Everett Lin

  • 990 Answers
  • Posted on Apr 15, 2009

SOURCE: Rplacing Waste Toner Container

Hello sir;The waste toner bottle right in front of the machine, when you open front door you ill see a white bottle remove and dump it out, turn power off and back on.

Ad
Cogz

Chris Coughlin

  • 1326 Answers
  • Posted on Apr 15, 2009

SOURCE: a message is poping out saying replace the waste toner container.

I'm taking it that you have a IR-2270, not a IR-5570 correct??? The waste toner bottle is behind the front cover... It is in front of the drum unit. It is measured by the weight of the bottle, you just need to empty the bottle and you should be all set.... There is one screw in next to the toner bottle.... The other one is on the top left front corner of where the paper comes out. You have to push the front pannel to the left to remove the cover... Good Luck

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

My Canon ir2270 is showing replace cartridge toner. Can this cartridge toner be repaired?

not a good idea to even try many makers have chipped the machines to only accept OEM
0helpful
1answer

My canon ir2270 is saying code error e000020-0000 please help me understand this

that error indicates that there is an obstruction between the toner hopper and the developing unit .
0helpful
2answers

Please help me a reset key for the copier machine IR2270 wich read error code E000000-0001

The abnormal rise of temperature.May be main thermistor or dc controller pcb.You have to reset the machine in service mode COPIER FUNCTION CLEAR ERROR.
0helpful
1answer

How to clean error 000024-01 in canon 2270

E024-0001 Error Code:

Toner gets in the developing assembly toner sensor (TS1) and may be shorting out the sensor. Blow out any toner in the sensor wiring and check to see if measure resolved the symptom. The toner level sensor has an open-circuit, replace the toner sensor.
Toner Sensor FK2-0358

However, re-attachment of the sensor also solves the symptom.

When the symptom has occurred, make the following selections in service mode [COPIER > I/O > DC-CON] and check the setting for the bit1 of [P021]. If the setting is "1", re-attach the toner sensor.
0helpful
1answer

Error code E00024-0001 for canon ir2270

Clean DP unit (developer unit) and install toner manually Press- additional Then 2,8 ,additional press Copier ,function ,install toner ,ok if not then Replace DP censer or toner hopper censer
0helpful
1answer

ERROR E0024 FOR CANNON IR2270

check the toner hopper .toner is not being fed into the developer module at set rate.clean the hopper by blowing the toner and check the toner screw motor for rotation and do check when u install toner by service mode does the toner bottle rotate.
5helpful
1answer

IR2270 copier displaied error code E000020-000

It's concerning the toner level in the dev unitor drum unit. Try entering service mode and selecting 'install' this will stir toner and try to feed toner through. Could be a dirty or faulty toner level sensor. Cuuld also be the drum life over - check drum life in the service mode. Check my other posts to see how to enter service mode
1helpful
1answer

Rplacing Waste Toner Container

Hello sir;The waste toner bottle right in front of the machine, when you open front door you ill see a white bottle remove and dump it out, turn power off and back on.
3helpful
1answer

A message is poping out saying replace the waste toner container.

I'm taking it that you have a IR-2270, not a IR-5570 correct??? The waste toner bottle is behind the front cover... It is in front of the drum unit. It is measured by the weight of the bottle, you just need to empty the bottle and you should be all set.... There is one screw in next to the toner bottle.... The other one is on the top left front corner of where the paper comes out. You have to push the front pannel to the left to remove the cover... Good Luck
Not finding what you are looking for?

60 views

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

old marine
old marine

Level 3 Expert

2426 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...