Sanyo drw-500 dvd recorder will not recognize channels from antenna in setup

Have you set the Sanyo to "antenna" or "remote" ?
Try the other setting.

If cable/SAT box, hook-up that box video/sound output to DVD video/sound input. If no cable/SAT box, hook-up cable from wall into antenna/cable in on DVD and tune DVD to channel wished, and hook-up DVD TV antenna out to TV antenna in. If DVD has no antenna/cable in, TV must have video/sound output. Hook to DVD video/sound input. Hope this helps.

Hi,
Click HERE to download user manual of Sanyo DRW-500 or if you looking for different model, let me know it.

most dvd recorders have setting to finalize at the end of a timer generated recording, or to fianalize when the disc reaches the end and runs out of room, check for one or both of these settings in the setup menu of the recorder

my drw-500 wont read any disc why its say NO DISC please help

I don't know about where you guys are but when I went on to www.sanyo.co.nz and went into support and insturction manual searched DVD recorder it came up with english manuals for all their DVD recorders, just cick on the one you need

How do i conected via sky+ to watch programs and record by telli

try cleaning the lens of your dvd if that does not work have a tech look at your dvd it could be having a problem in the recording circuit which is controlled by a chip.good luck

check partstore.com for a manual on your dvd recorder.good luck

if you have not plug out your set for a while then i recommend to do now leave it for about 2 days then plug it in back if it does the same problem,then have a tech look at your set.good luck