At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
E100 0000 BD detection PCB failureThe BD detection PCB is faulty. - Check the connector of the BD detection PCB.- Replace the laser scanner unit.- Replace the DC controller PCB.
Hi, you need to upgrade firmware from start. Download standby is message that appears when system is colapsed and when you want to upgrade firmware from service mode.
You can try to reconect the conectors on dc controler board, and on laser unit, clean the laser, check if the laser shuter is broken. If notthing helps the next step would be to chnage the laser unit and/or dc pcb
The most common cause for E100 is the drum unit. At the rear of the
drum unit should be a small peg pointing into the machine. This gets
broken off. It's purpose is to opperate a laser cut off shield when the
drum is removed so to prevent laser exposure. If peg is missing laser
will not be detected by the system and give E100. Can be repaired or
will require a new drum if it has done more than 40 to 60K copies.
×