I have a Maytag Frontload Neptune Model # MAH5500B washing machine which is about 5 years old. Washing, rinsing cyles work fine when it comes time to spin timer goes to 7 and then quickly goes to 0. It's like it misses the spinning cyle totally....therefor my clothes are still pretty wet. Any suggestions? Thanks for your help!
Either balance load sensor or machine failing to drain in the allocated time, check pump/filter for blockage
does not Pump or Spin then checkout this tip... not draining and or not spinning does not Pump or Spin then checkout this tip... not draining and or not spinning1,261 views
Usually answered in minutes!
My clothes wash fine but during spin cycle it stops at 7 and the machine shuts off. Clothes are still very wet
door doesn't lock, spin doesn't happen, clothes wet
Washer Goes From 7 To 0 And Skips Spin Cycle - Also Noticed In Other Blogs That A Class Action Suit Took Place Back In 2004 - 2005 Against Maytag And If You Missed The Opportunity To Get In On The Suit Your Out Of Luck - Still Searching For Recalls And Other Class Action Suits For This -- The Suit In 2004 Most Likely Was One Of Your Washers - They Give A Complete Model List And There Were Quite A Few -- Try That Direction And See What You come Up With
My washer won't automatically advance through each cycle; wash, rinse, spin. I can manually do this by pressing the start button. The machine seems to working normally and does clean clothes. But I have to babysit every load. I just replaced the main control board myself but the problem remains.
maytag model #AT35MN1 product built by wascomat in 1992 old style machcanial reversing timer. need wiring diagram for the timer. please help
opening the machine to access a lost item
×