54.12.00 error gives the error while printer is on

You are trying to install a printer but can't do so because of the Error 0x000003eb then you are at the best place as now we are continuing to discuss how to correct this issue. The error note doesn't give you much data as it just tells unable to install the printer and gives you the Error 0x000003eb.

If you are trying to install a printer but can't do so because of the Error 0x000003eb then you are at the right place as today we are going to discuss how to fix this issue. The error message doesn't give you much information as it just says unable to install the printer and gives you the error code 0x000003eb.

Method to fix Error 0x000003eb:-

1. Make sure Windows Installer Service is Running.
2. Perform Clean Boot.
3. Registry Fix.
4. The FULL solution is here-->Error 0x000003eb

Error 0x000003eb is usually caused by wrongly configured system settings or different entries in the Windows registry. This error can be fixed with this blog.

Canon printer is also one of them and can give you issue such as Canon printer in an error state.

A number of people who use Canon printers in their daily work may encounter a printer error that is "Canon Printer Error State". Also, they often seek help to fix this frustrating issue. The printing process is blocked by a system issue, prompting the Printer is in Error State error message. To get your printer out of the error state, the first solution is to change the ports settings.

This step-by-step guide, you will understand how to repair Canon Printer Error State.

Steps that fix Canon Printer Error State:-

Step 1: Correct Port issues.
Step 2: Re-install the driver.
Step 3: Manually update the driver.

Contact Expert here - Canon Printer Error State

what error message shows up? with out that we cant help you.

Power off the printer and turn it on again with the big button held down (the one with the tick on it).

This seems to clear the error and allow printing but won't fix the fault itself.

HP LASER PRINTER 2300 ERROR 52.X


1. A temporary scanner start up error.


2. This can also be the shutter tab on the print cartridge. Replace the toner cartridge.


3. Replace the scanner ***'y.


4. Replace the engine board.


Tallon41

That's a batch error, more than likely due to a communication issue between the pc and the printer. If you reboot the printer, THEN reboot the pc you should clear that error.
This error sometimes occurs when the printer has been shut down whil logged into your software, which disables communications between pc and printer. The error indicates that the printer didn't receive enough data to properly print the batch of labels/tags.

It is giving me an error message of "printer error,fuser temp"

my printer hp 2300 print only on page

either hard drive or network card.