I need an owners manual for my pioneer vsx-d308

you can go on the internet and put in the make and model of your pioneer and you can print out a manuel to most of these kind of electronic devices...good luck...

You most likely have a shorted amp IC.

I had the same problem. Dont know why the receiver set it up this way but grab your remote, go down to the lower right and select ch setup. Keep on pressing it till your receiver says SW. Then press lev+ on your remote to change the db on your powered sub.

What your unidentified TV >>requires<< is the BEST Video from every video source. That would be the DVD, SAT Box. It probably has multiple high-end video inputs, right?

What your receiver needs is at least a basic composite video connection to the TV so you can set it up and manage it.

A web search for "Pioneer VSX-D308 manual" will find the manual.

ALL of the BEST Audio should go directly to the Pioneer. That includes the SAT and DVD player.

Your TV can exist just fine with basic audio from the video sources. And you could still watch it/them without the Pioneer turned of if you want.

I can't find the exact manual for free anywhere but if you download something similar like http://www.retrevo.com/support/Pioneer-VSX-D409-Receivers-manual/id/385ci977/t/2/ it should give you the basic guidance you need.

I recommend

Do some web searching for what the cables are for. It's all basic and standard.

I only know of one way to do this and here it is:

1. Plug your tape deck's output (cassette or R2R) into the EQ's "Line In".
2. Plug the EQ's "Line Out" into the Receiver's "Tape 1 Input".
3. Now plug the Receivers "Tape 1 Output" into the Tape Player's "Line In".
4. You have now made an "FX loop" for the Tape Deck. Now you just have to put the Tape Deck on "Tape Monitor".....put the Receiver on "FM"..... and turn on your favorite FM station and you will hear the FM Receiver THROUGH the tape deck's "Monitor Send" AND the EQ.............set EQ to taste....... and BINGO.......DONE!

Enjoy,
SKYNETRP

Do you guys know how to turn up front speakers on this amp????

Is sub out turned on on the reciever? Some have a setting that doesnt use the sub out, like 2 channel.

I have the same problem. my sandby light is on but my receiver will not turn on! I checked my power going into the power supply board that was good. But i do not have power going to the transformer or the receptacle. And both of my fuses r good. check ur fuses and go from there . If u know how to get a power supply. please let me know.

go through your mode channels to put it on surround sound

Maybe the audio amplifier IC is damaged and you gotta change it.Good luck.