B6300 making clicking noise - OKI B6300 Laser Printer

3$
i guess..

1. change cartrige if problem not solved 2. there is mechanic problem 3. or LSU optics are not clear

1. Turn off the printer.
2. Hold down the shift and LF buttons at the same time and turn the printer back on
3. Release the buttons
4. The printer should be reset to factory defaults now

Try removing and then reinstalling. If this happens since you changed the drum and toner, then the issue would be with the defective replacement. Way to test is to reinsert the old drum and toner and if this does not happen, then you know the issue is with the new supplies

An initialisation fault has occured

There is a component fault with the machine.

The infomation supplied is insufficient to diagnose the fault any further

Your tonner have problems with humidity.

Change the Toner/Drum unit

You may find a suitable manual here:

http://www.retrevo.com/support/Oki-B6300-Printers-manual/id/1304dj983/t/2/

Also, the tech manual is here:

http://my.okidata.com/tech-b6200-b6300.nsf/MOCContents/377DAE221B3535AF85256EE8006B0F59?OpenDocument

pls refix your catridge & clean the paper sensor.

try this:

1.Press Menu = printer displays "Paper Menu"
2.Press Next 4x = printer displays "System Menu"
3.Press Select 1x = printer displays "Factory Defaults"
4.Press Next 7x = printer displays "Reset Toner Life"
5.Press Select 1x = printer displays "Resetting Toner Page Count"
6.Press Ready

USE A BIT OF FORCE, NOT TOO MUCH, BUT YOU WILL FIND IT CLICKS IN