At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Hi!
Where can I get a print driver for our Konica/Minolta bizhub C350? I need a Mac version that will work with OS X 10.6.8...
The Konica Website is NO help, (to me with my limited exposure to these types of issues, anyway). Previous posts on this subject seem to be from March 2013 or prior.
I am hoping that someone can help me - please!! AAAHH!!
Any suggestions are appreciated.
Thanks!!
_mjnc
Kmbs.konicaminolta.us
In the top right corner you will find the downloads link. You will find all available drivers. The C350 is a older model and there my not be drivers available for newer version computers.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You have to have a fiery unit (external controler) to use the C350 With a Mac because the c350 dosnt come with appletalk in the software. IC-401 Is the model number of the controller you will need to connect the c350 to any kind of mac for printing / scanning.
Hi, which version of Mac OS have you ? what are your problems ? also, i ve sent the ppd necessary for the Bh250 Mac driver on http://crackzfr.free.fr/bh250.sit. You'll have just to register it on your mac and, you'll be able to print on your Bh...
I believe that machine uses the same print controller as the Bizhub C350. You will have to verify this - it's an optional unit attached to the rear of the machine. It will be where your network wire plugs in. It "should" be a IC-401 model print controller. That's the driver you need from Konica.
×