Fuzzy picture i gave my son my 42 inch rear projection last year,for the past 3 months when he switches the tv on it goes fuzzy for about 10 mins than it gets better by the minute,but lately it seems to be taking longer to get the picture to normal,can you advice me on this problem please.

Just click below for convergence repair kit;

http://servicemanuals.vstore.ca/

Double images and colors are blurry .Blue,red and yellow wave coming up from the bottom of the screen on the lower left and fuzzy images this is a symptom is for busted convergence IC,you must replaced this IC in order that will works better again.STK 392-xxx ICs and it's associated resistor,this resistor automatically change value,can caused truoble even though you change the ICs.If you bring this to a service center they cost you $600 to $700,but if you buy the repair kit you can save more,don't wory it is very easy because there is intallation guide including in the repair kit. Feel free to ask whatever the result... click the link for sample picture guide step by step installation;

Hope this may help;

Regards,
VOTIT

Very common problem with these set. toshiba issued a repair instruction for this. the bad news is its not an easy fix. what is happing is falure of what is called the hypermodule. ideally it wouldbe best to replace this curciut board ....BUT this is not available. the next thing is what we do at our shop. we repair the board very difficult) it involves replaceing 11 micro caps. very difficult soldering and you can damage the booard.. it can be done just get sombody good who done it beforemy shop charges about 200 because of the labor involved