Forget change password

This needs to be discussed in different situations, you can check whether these situations can solve your current problem.
Scenario 1: All Default Passwords Are Changed and All Passwords Are Forgotten If you change all default passwords and forget the console port login password, all STelnet/Telnet login accounts and passwords, and BootROM/BootLoad passwords:
·For a switch that has the PNP button, you can press and hold the PNP button for more than 6 seconds to restore the switch to factory settings and restart the switch. The following figure shows the PNP button.
·If the switch does not have the PNP button, return it to the factory for repair.
Scenario 2: Default Passwords Are Forgotten For S series switches running V200R020 and later versions, no passwords are configured for default accounts, and users must configure new passwords for logging in to the switches. In this situation, scenario 2 is not involved.
However, for S series switches running versions earlier than V200R020, there is no default STelnet/Telnet login password, but there are default console port login password, default BootROM/BootLoad password, and default web login password. These default passwords may vary according to the switch version.
If you always use the default passwords and have not changed the passwords, you can obtain the default accounts and passwords according to S Series Switches Default Usernames and Passwords (for enterprise users or carrier users). The permission level of this document is C (customer support level). If you need to upgrade the permission level, see the help document on the website.
Scenario 3: The Console Port Login Password Is Forgotten Three methods are available to recover the console port login password.
·Method 1: Log in to the device using STelnet or Telnet and change the console port login password.
·Method 2: Clear the console port login password in the BootROM/BootLoad menu and change the console port login password.
Scenario 4: The STelnet/Telnet Login Password Is Forgotten ·If you forget the login password of an STelnet/Telnet account, you can use another STelnet/Telnet account with administrator rights to log in to the device and reset the password. For details, see Method 1.
·If you forget the passwords of all STelnet/Telnet accounts but can log in to the device through the console port, see Method 2.

Method 1: Use an STelnet/Telnet Account with Administrator Rights to Log In to the Device and Reset the Password

1.Log in to the switch using the STelnet/Telnet account with administrator rights.
2.Change the STelnet/Telnet login password. The following example describes how to change the STelnet/Telnet login password of VTY0 to VTY4.

Method 2: Log In to the Device Through the Console Port and Set a New STelnet/Telnet Login Password

If you forget the STelnet/Telnet login password but remember the console port login password, log in to the switch through the console port and set a new STelnet/Telnet login password.
Scenario 5: The BootROM/BootLoad Password Is Forgotten but the Console Port/STelnet/Telnet Login Is Available If you can log in to the switch through the console port, STelnet, or Telnet, log in to the switch and restore the default BootROM/BootLoad password. You can obtain the default accounts and passwords according to S Series Switches Default Usernames and Passwords (for enterprise users or carrier users). The permission level of this document is C (customer support level). If you need to upgrade the permission level, see the help document on the website.
Scenario 6: The Web Login Password Is Forgotten but the Console Port/STelnet/Telnet Login Is Available If you can log in to the switch through the console port, STelnet, or Telnet, log in to the switch and reset the web login password. In the following example, the web login user name is admin123 and the password is test@123.
For more reference resources, please click to enter (ebook) CloudCampus 3.0 Solution:
https://support.huawei.com/enterprise/en/doc/EDOC1100201111
OR you can straight to see this decument
https://support.huawei.com/enterprise/en/doc/EDOC1100200698#section1612361212554

reset the router by holding the reset button for 30 seconds.
the default login is

• Username = admin
• Password = password
• • For older devices, password = 1234

The default password is 136900.

The user manual (page 44) briefly details the general setup preferences, including;

To change the password:

1) Press OK to access the change password menu.
2) Use the numeric keypad 0-9 on the remote control to enter your existing six-digit password at { Old Password }.

Note: When doing this for the first time or if you forget your existing password, enter '136900'.

3) Enter the new six-digit password at { New Password }.
4) Enter the new six-digit password again at { Confirm PWD }.
5) Press OK to confirm and exit.

It shouldn't matter what your old password was, if you forget it, try the default, then confirm and exit.

For the Original Firefly Phone:
The default PIN is: 1 2 3 4.

For the glowPhone:
The default Password is: 0 0 0 0
When you first set up your password, you will be able to change from the 0 0 0 0 and enter your own.
If you should happen to forget what password you entered, you can enter the bypass password: 5 6 7 8 and this will then allow you to go into Parental Controls and change your password:
- Scroll to and select Permissions
- Scroll to and select Change Password
You will be prompted to enter a new password, then reaffirm it. You will get a confirmation when the password is successfully changed.

For the flyPhone:
The default password is: 1 2 3 4
When you first set up your password, you will be able to change from the 1 2 3 4 and enter you own.
If you should happen to forget what password you entered, you will need to follow these steps:
- Turn on your flyPhone
- From the Main Firefly Screen, you will need to type in the following (once you start typing, the screen will change): #20070330#
This will restore your flyPhone back to the default settings, so you can now go back in and reset your password.

or try this:
How can I change my phone's Password/PIN? For the Original Firefly Phone:
- Press and hold the green SEND button until you see ENTER PIN. Press Enter.

- Enter your PIN Number by scrolling though and accepting the four numbers you choose. (The default PIN is 1 2 3 4).

- Scroll to DONE and Press OK.

- If your PIN numbers are accepted, the display will say Change PIN.

- Press OK to let Firefly know that you do want to change that PIN.

When the display panel says SAVED, your new PIN is loaded.


For the glowPhone:
The default Password is: 0 0 0 0
When you first set up your password, you will be able to change from the 0 0 0 0 and enter your own.
If you should happen to forget what password you entered, you can enter the bypass password: 5 6 7 8 and this will then allow you to go into Parental Controls and change your password:
- Scroll to and select Permissions
- Scroll to and select Change Password
You will be prompted to enter a new password, then reaffirm it. You will get a confirmation when the password is successfully changed.



For the flyPhone:
The default password is: 1 2 3 4
When you first set up your password, you will be able to change from the 1 2 3 4 and enter you own.
If you should happen to forget what password you entered, you will need to follow these steps:
- Turn on your flyPhone
- From the Main Firefly Screen, you will need to type in the following (once you start typing, the screen will change): #20070330#
This will restore your flyPhone back to the default settings, so you can now go back in and reset your password.

Hope this helped.

Source: http://www.fireflymobile.com/

Setting the router's administrator password

All Belkin Router's ship without an admin password. If you require an admin password then follow the below instructions.

Setup steps:

1. Connect the computer to one of the four LAN ports on the router.
2. Open a web browser on the computer.
3. In the address bar of the web browser, type http://192.168.2.1
4. Click Login in the upper right-hand corner of the page. The router does not ship with a password, so just click Submit.
   
5. Click on System Settings under Utilities on the left-hand side of the opened page.
   
   
6. You will see a feature called, "Administrator Password". Type in your current password (default leave blank).
   .
   

7. Click "Apply Changes". Your new password is now active.
   

Note: Do not forget the new password and keep it somewhere safe. If you forget your password, you'll be unable to access your router's settings. If you forget or lose your password, you'll need to "restore to factory default". This will reset the password to its default, as well as erase any and all other settings you may have changed.

1. Connect the computer to one of the four LAN ports on the router.
2. Open a web browser on the computer.
3. In the address bar of the web browser, type http://192.168.2.1
4. Click Login in the upper right-hand corner of the page. The router does not ship with a password, so just click Submit.
   
5. Click on System Settings under Utilities on the left-hand side of the opened page.
   
   
6. You will see a feature called, "Administrator Password". Type in your current password (default leave blank).
   .
   

7. Click "Apply Changes". Your new password is now active.
   

Note: Do not forget the new password and keep it somewhere safe. If you forget your password, you'll be unable to access your router's settings. If you forget or lose your password, you'll need to "restore to factory default". This will reset the password to its default, as well as erase any and all other settings you may have changed.

Use a strong alphanumerical (letters/numbers) password.

Setup steps:

1. Connect the computer to one of the four LAN ports on the router.
2. Open a web browser on the computer.
3. In the address bar of the web browser, type http://192.168.2.1
4. Click Login in the upper right-hand corner of the page. The router does not ship with a password, so just click Submit.
   
5. Click on System Settings under Utilities on the left-hand side of the opened page.
   
   
6. You will see a feature called, "Administrator Password". Type in your current password (default leave blank).
   .
   

7. Click "Apply Changes". Your new password is now active.
   

Note: Do not forget the new password and keep it somewhere safe. If you forget your password, you'll be unable to access your router's settings. If you forget or lose your password, you'll need to "restore to factory default". This will reset the password to its default, as well as erase any and all other settings you may have changed.

From the manual
2. Leave the router powered on.
3. Use a paperclip (or similar) to press and hold in the reset button for 10 seconds.
4. Remove the paperclip.
5. Wait approximately one minute for the router to restart.

The settings for the router have now been reset back to their default.



All Belkin Router's ship without an admin password. If you require an admin password then follow the below instructions.

Setup steps:

1. Open a web browser on the computer.
2. In the address bar of the web browser, type http://192.168.2.1
3. Click Login in the upper right-hand corner of the page. The router does not ship with a password, so just click Submit.
Image
4. Click on System Settings under Utilities on the left-hand side of the opened page.
Image
5. You will see a feature called, "Administrator Password". Type in your current password (default leave blank).
.Image
6.

Click "Apply Changes". Your new password is now active.

Note: Do not forget the new password and keep it somewhere safe. If you forget your password, you'll be unable to access your router's settings. If you forget or lose your password, you'll need to "restore to factory default". This will reset the password to its default, as well as erase any and all other settings you may have changed.

http://en-us-support.belkin.com/app/answers/detail/a_id/30/kw/password/r_id/166

Setup steps:

1. Locate the reset hole on the router. The button will be on the back or side of the router.
   See images below:

1. Leave the router powered on.
2. Use a paperclip (or similar) to press and hold in the reset button for 10 seconds.
3. Remove the paperclip.
4. Wait approximately one minute for the router to restart.

The settings for the router have now been reset back to their default.
All Belkin Router's ship without an admin password. If you require an admin password then follow the below instructions.
Setup steps:

1. Open a web browser on the computer.
2. In the address bar of the web browser, type http://192.168.2.1
3. Click Login in the upper right-hand corner of the page. The router does not ship with a password, so just click Submit.
   
4. Click on System Settings under Utilities on the left-hand side of the opened page.
   
   
5. You will see a feature called, "Administrator Password". Type in your current password (default leave blank).
   .
   
6. Click "Apply Changes". Your new password is now active.
   

Note: Do not forget the new password and keep it somewhere safe. If you forget your password, you'll be unable to access your router's settings. If you forget or lose your password, you'll need to "restore to factory default". This will reset the password to its default, as well as erase any and all other settings you may have changed.

do you have..
DWL-P200
or
DWL-P50?
should say on the box...........