I have a Kenmore 70 series washer Model 110-20722990. I am trying to find out what kind of tub is in it (plastic or steel) and the capacity. I don't see this info on the washer anywhere. Thanks!

Kenmore 110 washer capacity
Washer. The Kenmore 70 series washer has a 3.5 cubic foot capacity. It comes with the Sears Triple Action agitator and can hold 28 extra-large t-shirts in a single load.

Kenmore Series 70 Specifications ' Hunker

In the Kenmore line of washers and dyers, the 70 Series is a mid-priced family appliance that handles an average family's laundry needs. All appliances in the 70 series are freestanding and do not have stackable units. Available with both English and Spanish instructions, this mid-line series of appliances is suitable for almost any household needs. Kenmore Series 70 Specifications eHow

There is no sealant that will withstand these kind of forces.
I'm sorry.

there is a plastic tube that runs
from the tub to the overflow switch in washer. If this develops a hole in it, air
pressure is not applied to the switch to shut it off. good-day !

The cubic feet of the Kenmore washer model 110 heavy duty is 2.8 cubic feet. Measured to the top water line 14.5 inches and using the radius of the tub of 10.375 inches.

I would say you have something between the tubs but it continuing to buzz tells me it's the motor.

3.2 cu Ft




Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Tyler,
It came off of the Clyde, OH production line the 26'th week of 2001.

Amazing, ain't it? Seriously... the info is embedded in the serial number. Here's the link to the code sheet.

Please remember to rate this solution as "FixYa", OK?

SG

it is a large capacity 2.3 cf with a small case.

i have a kenmore 70 series washer model 10020722990
it will fill with water but will not wash. if you put it on spin the water will drain but it will not spin. it sounds like the motor turning. is it a clutch that has broken.