I have one of the older Westinghouse Security Systems at my house. My power went off for 2 days and when it came back on - my security system was beeping. I pushed *3 and it stopped but it also has a button that says "trouble". How can I delete this off my panel. This security system is about 14 years old.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
westinghouse the security system the system is beeping when i disconnect it shuts....Download the manual. I can't remember if it is in the User's Manual or the Programming Manual but a sequence to reset the security code is detailed in one of them. Also, it sounds like the telephone line was wired through the system for full seizure. To defeat this, you will need to take it out of the phone lines at the outside telco box. How it is wired is that the alarm panel intercepts the telephone line first and then feeds the circuit back out to the main junction where the telco comes into the house
There are two types of home alarm systems, the wireless home alarm system and the hard wired home alarm system. Wireless home alarm systems are the most common these days with many of them having a simple do it yourself installation. Hard wired home alarm systems are still around and still used, however. Wireless home alarm systems are much simpler to install and much easier to maintain. (www.prweb.com)
Check all ur windows and doors sensoring connections,might need to be changes.Weather is too hot or too cold,will trigger the alarm.When u arming tries by passed and any error codes for doors or windows connections codes.This should stop the fault alarm by the expanding and contracting sensors by the weathers.
I agree with the mechanic..
I would have someone remove the security system all together from the van...
You dont mention what model van ... or year... so it's hard to discern what to do from this point.
Call an alarm company like ADT. If they can use it they will. it will require some minor reprogramming and they will check all sensors, if the use it. 1-800-ADT-ASAP.
Those of you having problems with the beeping on the Westinghouse systems when the doors/windows open. The solution on the XL4600 is #6 this should slience that!
Download the manual. I can't remember if it is in the User's Manual or the Programming Manual but a sequence to reset the security code is detailed in one of them. Also, it soulds like the telephone line was wired through the system for full seizure. To defeat this, you will need to take it out of the phone lines at the outside telco box. How it is wired is that the alarm panel intercepts the telephone line first and then feeds the circuit back out to the main junction where the telco comes into the house.
×