How do I change the analogue time of my citizen navihawk watch to match the ditital time

search google for the manual: citizen navihawk manual pdf

yep. reset it to zeros and then set the time and they will match. here is where to get the manual (get the C300).

http://www.citizenwatches.com.au/instruction-manuals

you have to perform a reset to zeros and then reset the time. get the manual here
http://www.citizenwatches.com.au/instruction-manuals
it is C300.

it is easy. get the manual here (C300)

Go here to look up the instructions for your watch,
http://www.seikowatches.com/support/ib/index.html

You can get instructions from the Citizen web site.

Go to "citizen.com" and on the upper right there is a menu. Click on "technical support" and then on "setting instructions"

Fill in the information required from the back of your watch and then click on "get setting instructions"


or

Go to "citizen.com" and click on "watch finder".

Put your watch model into the search box on the left and click on
"search".
Click on the watch to view details.
On the right is a small menu, click on "get technical info"

On the right you you will see a list of instructions you can download.

Did this start after you had the battery changed? It is not uncommon for the alarm contact spring to get broken off that way.

Being able to tap it and bring it back is a sure sign that there is a contact problem most likely in the circuit board. This is the worst case scenario. I would try going to a watch maker/technician to see of having the watch AC'd or reset fixes the problem. If not then I would have them look at the circuit board/movement. This may have been damaged during battery placement from too much pressure.

If you have trouble finding a qualified watch maker/technician you can go to Citizen.com to look up their service center or an authorized service center near you.

Need a time travel?