I am switching my kenwood from a honda accord to a geo storm and i need the wiring color codes so i can attach a new adapter to connect to the car
Http://www.tehnomagazin.com/Auto-radio-car-connector/KENWOOD-Car-Radio-Wiring-Connector.htm for the deck
.
1) Remove the ashtray and the two outermost screws exposed in the ashtray cavity.
2) Remove two screws from each side of the dash console.
3) Remove the climate control knobs.
4) Unclip the trim bezel and remove.
5) Remove four screws securing the car stereo to the dash.
6) Pull car stereo from console releasing antenna and connectors.
Constant 12V+
Red
Switched 12V+
Orange/Yellow
Ground
Black
Illumination
Red/Green
Dimmer
Green/Red
Antenna
Driver's Pillar
Front Speakers
6 1/2" Doors
Left Front (+)
Orange
Left Front (-)
Black
Right Front (+)
Gray
Right Front (-)
Green
Rear Speakers
4" Tail Gate
Left Rear (+)
White
Left Rear (-)
Red
Right Rear (+)
Yellow
Right Rear (-)
Blue
http://www.tehnomagazin.com/Auto-radio-c... for the deck
.
1) Remove the ashtray and the two outermost screws exposed in the ashtray cavity.
2) Remove two screws from each side of the dash console.
3) Remove the climate control knobs.
4) Unclip the trim bezel and remove.
5) Remove four screws securing the car stereo to the dash.
6) Pull car stereo from console releasing antenna and connectors.
Constant 12V+
Red
Switched 12V+
Orange/Yellow
Ground
Black
Illumination
Red/Green
Dimmer
Green/Red
Antenna
Driver's Pillar
Front Speakers
6 1/2" Doors
Left Front (+)
Orange
Left Front (-)
Black
Right Front (+)
Gray
Right Front (-)
Green
Rear Speakers
4" Tail Gate
Left Rear (+)
White
Left Rear (-)
Red
Right Rear (+)
Yellow
Right Rear (-)
Blue
×
922 views
Usually answered in minutes!
×