How to shutdown ts3200 - IBM TS3200 LTO4 TAPE LIB W/ SCSI (3573L4H) Ultrium Tape Drive

You will need to contact IBM support and after providing proper I.D. verification , they should be able to give you a password which you will be able to use. Due to security issues with stored info, you will have to provide the proper ID info as the original purchaser. Best Wishes

The manual is online with IBM.
Chapter 8 explains the error codes and 9F (mean Error code) means Rotation range out of specification 08 9sub error code) means error during rotation initialisation, get range failed.
Then the manual says: "Isolating a library controller card versus accessor enclosure problem" on page 7-11
But I guess you better look it up yourself. If you don't have any parts, you have to contact IBM.
Look yourself? start in chapter 8, page 225 of the manual under this link.
http://publibfp.dhe.ibm.com/epubs/pdf/a320545c.pdf

Hi Edson

It sounds like the new drive may also be faulty.

Dont forget to make sure that all the scsi ID jumpers and switches are set exactly the same as the one you removed.

dear friend send me the solution i have seen the same recently with mine too

Error 9E 09

9E : Elevator range out of specification

Primary: Library Enclosure
Secondary: Library Controller Card
09 : Error elevator init

Reported for abuse of T&C. No advertising.

ibm ts3200 is a single tape library with 2 versions, 2U and 4U, the 2U version support 2 drives HH and the 4U version support 2 FH and 4HH.

Hy ,according to manual it can have up to two drives.

trial and learn...

place only one tape drive in a deck and tell it to do a backup till it doesnt give an error. then move to the next drive.

Try the default password, "secure".