Question about Nor-Lake Freezers

Open Question

Cl code on f235

How to reset after cl code

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Our fridge compressor won't run after a power outage, can it be reset?


compressors use a small start / run capacitor to start the compressor
modern fridges do not like spikes from power outages and many power boards and electronic components fail because of this and I am inclined top use a surge protector before the fridge cord plug
I went google and typed in --fault code 88-88 for samsung fridge model rf26aewp and the first site up is error codes /messages/ blinking
the site is support-us.samsung>popup>iframe
there is a detailed answer there with a list of fault codes as well and what they indicate
there are other sites that also refer to the fault that you have

Dec 15, 2015 | Samsung RF267AEWP - 26 cu. ft. French Door...

1 Answer

Getting error code 36 hour duration


I appreciate your inquiry, friend!

Based off what you have described your Frigidaire freezer is displaying an error code of 36 hours. Normally it will display that once power has been restored, it is indicating that the freezer has been without power for 36 hours. Hold the "alarm reset" for 3 seconds and that should help clear out the code. I hope this is helpful. -Matt

Mar 10, 2015 | Frigidaire 20.3 Cu. Ft. Frost-Free Upright...

2 Answers

How do I reset blinking code, 33 E, on Samsung French door fridge after power outage?


33 E code, hold energy saver button and the lighting button at the same time for 6 to 10 seconds

Oct 13, 2014 | Samsung RF323TEDBSR 31.6 Cu. Ft. French...

1 Answer

Error code 8


Good Afternoon Glenda, thank you for your inquiry!

Is it possible that the error code is missing characters? According to my research 8 is not a valid error code. The number 8 is more like a temperature setting, however to be certain, let's try resetting the appliance. It is important to wait roughly ten minutes and then turn the unit on. Set the correct temperature and please allow 24 hours for the temperature to stabilize. The error code should clear and the unit resume to normal operations. I ask that you please follow up with a comment on the post, at your convenience, to advise if further troubleshooting is needed or if the unit's status has changed successfully.

Best regards!

Sep 10, 2013 | Frigidaire Freezers

1 Answer

FF 6 code


What is the model number?This error code FF indicates a problem with the main control board. When the power cord is disconnected for 30 seconds and then reconnected, it resets the board. Sometimes this procedure corrects the problem and sometimes it does, for only a short period of time. Usually in this case, the main board will need to be replaced.

Nov 10, 2012 | Kenmore 19.7 cu. ft. / 558 liter Chest...

1 Answer

On our walk in freezer, the closer at the top is lesking fluid


I would seriously consider replacing it, it is probably worn beyond repair.
Good Luck.
Gilshultz

Dec 02, 2009 | Master Bilt 95 cu. ft. Commercial Freezer...

1 Answer

Compressor will not start


Take and close down the suction valve on the compressor and then try to start the unit after you recover some of the refrigerant out of the compressor the reason that it is acting like that is probebly because the compressor is full of refrigerant and slugging the valves. also verify the you have all the lesgs of power going to the unit. let me know how this turned out.

Dec 24, 2008 | Master Bilt 95 cu. ft. Commercial Freezer...

Not finding what you are looking for?
Freezers Logo

Related Topics:

277 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nor-Lake Freezers Experts

Dennis Boxerman

Level 3 Expert

1280 Answers

Steve Allison
Steve Allison

Level 3 Expert

5569 Answers

Brad Brown

Level 3 Expert

18031 Answers

Are you a Nor-Lake Freezer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...