I am facing the problem with A410 set of siemens. when i am connecting the cordless phone to line it is ok. After first incoming call. it is showing line in use. so afterwords i am not recieveing any call from my set. But when again i am switchinh off my phone and again connecting to telephone line. it is working file till first incoming/outgoing call. afterwords again showing line in use.
kindlly tell me the solution.
i am staying in Navi mumbai. so guide me or provide me the contact number and address of your repairing center.
Thanking you
sanjay
Your unit got hit by a lighting strike, but it is fixable. Go to www.cordlessrepair.com
677 views
Usually answered in minutes!
Changed to VOP from cable provider as voice line source. Older Panasonic PBX used to be analog land line as input. In bound phone calls function normally on all phones connected to the PBX. None of the phones will connect outbound to allow an outgoing phone number to be placed. Problem is the PBX as a phone at the PBX input jack will allow an outgoing call.
Changed to VOP from cable provider as voice line source. Older Panasonic PBX used to be analog land line as input. In bound phone calls function normally on all phones connected to the PBX. None of the phones will connect outbound to allow an outgoing phone number to be placed. Problem is the PBX as a phone at the PBX input jack will allow an outgoing call.
×