Mini digital scale (6313014A) displays out2 when powered on. how do i fix this?
I just had this problem on set Salter scales (says 3309 on label on back so assume that's model no) which came up OUT2 solidly after hadn't been used for a while.
Looking on WWW this means on other scales they need to be recalibrated. There are only 2 buttons on ths model ON/Zero and 2nd is mode for grams, oz etc. Discovered by trial and error have to hold down the on button and repeatedly click the measure button as it powers up, screen says err2 press on button again and says 5000g, put 5000g weight on scales, press on button again display says CAL press on button and it at first came up with EEEE and failed but next attempt it said PASS and it all worked again. I used 2 x 1.5kg bags flour and 2 x 1Kg bags sugar to make 5kg with bit tipped out of one to make exact and checked on another set scales. So trick appears to be finding how to get your scales in to calibrate mode and what the weight it expects is.
Come on a nickel weighs 5 gram 20 nickels 100g
Solution 1 worked with my 100g digital scales but what to use if you don't have a 100g weight? A lot of thought went into the solution, 2p's weigh 7g so, 10 = 70 then used 3 stock cube which each weigh 10g
Just remember to take wrapping off
Dear HoMedics, The display on my digital bathroom scales is not working. Can you help? Jeffrey Olsen
14,386 views
Usually answered in minutes!
×