I have a Magnovox video cassette & dvd player combo, model # DV200MW8. I have an RCA analog TV with 1 cable port in the back and 3 RCA jacks ports. Previously, my Maganavox VCR/DVD player was connected to the TV from 3 RCA jacks into the back of the TV from the back of the VCR/DVD player. The antenna cable from the rabbit ears ran into the single cable port in the back of the TV. Now, the antenna cable from the rabbit ears runs into the In From Antenna port in the back of my converter box, and the 3 RCA cables run from the back of the converter box into the back of the TV. This is how I had to do the digital conversion and it works fine. The problem is, how do I now connect the DVD/VCR? There is no cable port in the back of the DVD/VCR--input or output--so I can't run a coaxial cable from the DVD/VCR into the (now) open cable port on the back of the TV.

no model TV told at all.nor year made. 1967 to 2004??????
not sure what you are attempting at all
first off there are no more VHF/UHF wide band TV now.
its all gone. bye bye. HDTV yes , old analog is gone. buried.
this TV is NOT CABLE ready, back in 1967 era,no such thing.
make relic TV work needs
a video to vhf channel 3/4 converter like old Pong or ATARI games had.
yes there are converters. to do video to modulated channel 3/4
but not told at all what is your video choices,?sources.
DVD
RCA video jacks.
cable modems do not have those.

I bet you have cable modem or a SAT modem
and converting HDTV to analog is wow hard. if not impossible
one can record a video sources and convert it using PONG adapter. to old CRT motorola quasar.

quasar Company ceased to exist in 2004. ! Beside Uwave ovens.
and
Motorola 1974 sold its television business to Matsushita Electric, now Panasonic

https://www.ebay.com/sch/i.html?_from=R40&_trksid=p2047675.m570.l1313&_nkw=+RF+Modulator+RCA+Input+Channel+3+4+Adapter+Output+&_sacat=0

the above will work ch.3/4 VHF with video sources.

restore your dvd on factory setting your problem will solvs

the back of the vcr/dvd player will have some rca plugs that are red,yellow,white,they will be labeled out putthe yellow is video,the red and white are left and right audio,the back of your tv should have the same thing,it should say input,get a rca cable with plugs on both ends and match the plugs to the colors,if you tv or dvd player,doesnt have these,then you will need to plug your cable box into the dvd player and run a coaxial from the dvd player and tv,use channel 3 or 4 on the dvd player and 3 or 4 on the tv

You need a set of normal rca cables (red.yellow,white) and another single rca cable..
OPTION 1 :If you have a digital satellite receiver, Connect the 3 colour cables to the corresponding colour jacks on VIDEO 2 of your dvd player to corresponding colour jacks on the VIDEO OUT Of your digital satellite receiver...Connect the single stand alone rca cable to MONITOR OUT on your player to the VIDEO IN input of your tv..

OPTION 2 STRAIGHT TO TV: connect the 3 colour cables directly to the corresponding colour jacks on the SIDE of the tv...Connect the single stand alone rca cable to MONITOR OUT on your player to the VIDEO IN input of your tv..

OPTION 3 IF YOUR PLAYER HAS AN OPTICAL INPUT: if this is the case you can just connect a single optical cable to the optical ports on your player and tv and this will enable the sound from your tv to play through your dvd player as well

Do you have a newer TV or a older one lets start with a newer models does your tv have 3 or more jacks on the back or front you should see a RED, YELLOW and WHITE if you have a HDTV you should see more. (LETS HOOK UP) Did your DVD/VCR come with a cables if not you will need to buy at least 2 they are called RCA cables Lets start with the dvd/vcr combo on the back you should see a (LINE OUT) this is where playback or your picture and sound come out. On the back of the TV you should see a (LINE IN) this is where you plug it in to. RED goes to RED, WHITE goes to WHITE and YELLOW goes to YELLOW. To Record you will need to hook up the line in on your combo and the line out to your tv. ( IF YOU HAVE AN OLDER T.V WITH NONE OF THOSE JACKS ) you will need to buy a RF- MODULATOR the are cheap it is a box that let you hook a cable wire to a little box and the RCA jacks to you combo and you will turn your tv to channel 3 or 4

have dvd and casssette dvd not work notice a p shows up on displays how do i get rid of the p that displays when ai go to dvd mode

rf modulator

Negative. Here are the specs for your TV/DVD combo: I hope this solution is helpful. Please take a moment to rate this solution.

Toshiba MD13M1 Dvd Type: DVD player - built-in
Media Type: DVD, CD, Video CD
DVD Repeat Modes: A-B repeat, title, chapter
CD Playback Modes: Program play, random play / shuffle, all tracks repeat, one track repeat
Tv tuner Analog TV Tuner: NTSC
Reception System: NTSC-M
Analog Channel Qty: 181 channel(s)
Channel Coverage: VHF:2-13, UHF:14-69, Cable:1-125
MTS Stereo: Yes
Secondary Audio Program (SAP): Yes
Video features Closed Caption Capability: Yes
Closed Captioning on Mute: Yes
Remote control Type: Remote control - infrared
Features: Back-lit buttons
Connections Connector Type:

• 1 x headphones ( mini-phone stereo 3.5 mm ) - front
• 1 x composite video/audio input ( RCA phono x 3 ) - front
• 1 x SPDIF output ( RCA phono ) - rear
• Composite video/audio input ( RCA phono x 3 ) - rear
• 1 x antenna ( F connector ) - rear

your model is "tuner free" that means it does not have the RF screw in connector. Buy one that has a tuner, preferably both ATSC(USA digital) and NTSC(USA analog)

We also don't have a remote. We hooked a DVD/VCR combo to the Samsung combo by attaching the cable from the cable line to the DVD player and an additional cable from DVD to TV and it used to work but after we lost the control, the DVD can only be listened to but not seen. The VHS from the DVD player works perfectly though.

When we had the remote (before connecting the other combo) we used line-in to see a DVD or VHS using the yellow red and white cables from the Samsung to the other player.