Black 7 Decker Steam Express AS250 Iron

Bring the iron to a Hardware store, ask for a set of tools right for the type of screws (maybe Torx, Security Torx, tri-wing, bristol and others).

Once you can open the iron and access to the cord you may change the power cord. it is easy.

Power goes on & off because the power cord is broken. This failure is very common on irons.

Good luck

Your iron needs a big screw driver !!!

Hi,
The cord is broken...

Here is a tip that will help you to troubleshoot your iron and figure out what is wrong with it.

Electric Iron not Heating Up or not Working Right
http://www.fixya.com/support/r5300202-electric_iron_not_heating_up_or_not

heatman101

Hi,

Here is a tip that will help you to troubleshoot your iron and figure out what is wrong with it.

Electric Iron not Heating Up or not Working Right
http://www.fixya.com/support/r5300202-electric_iron_not_heating_up_or_not

heatman101

the heater is defective. or the fuse is busted

Hi,
It is best to use bottled spring water...

Here is a tip that will help you with that problem...

My Steam Iron is Leaking Water
http://www.fixya.com/support/r5301301-steam_iron_leaking_water

heatman101

It should be still under maufacturers warrenty? Take it back to where you bought it from.

Hi,
Try using different water...

Here is a tip that will help you with that problem...

My Steam Iron is Leaking Water
http://www.fixya.com/support/r5301301-steam_iron_leaking_water

heatman101

Just open your flat iron and locate the face plate contactor that has a soot burn causing the filament not to heat,use a sand paper to clean the contact from soot burnt,this the common problem of a flat iron...


Hope this may help;

Regards,
VOTIT

DON'T FORGET TO RATE;

Hi,
Check the cord...

Here is a tip that will help you to troubleshoot your iron and figure out what is wrong with it.

Electric Iron not Heating Up or not Working Right
http://www.fixya.com/support/r5300202-electric_iron_not_heating_up_or_not

heatman101