Setting clock on fagor 6h-230 x

Most likely display / clock needs replacing

Depends where you are. I believe Fagor are a Spanish company, where are you?

yes...mostly. they are the "second hands" of the clock...sometimes, they indicate "cooking" or "timer"...but mostly they just blink to show the clock

Hi firstly, U.K uses 110 Vdc and rest of the world or most of the other parts of the world use 220-230 Vdc, so unless your Fagor 5HA200LX Oven has a built in voltage converter from 110 Vdc to 220 Vdc, which most new appliances have these days.
Try these shops:
http://www.fagoramerica.com/shop2/replacement_parts/halogen_oven#
http://www.guaranteedparts.com/category/FAGOR.html

It will work fine - just don't forget to have some sort of alarm clock handy for obvious reasons.

Buy a new oven, other brands not Fagor.

Hello,
Please find here our reply from the customer service of Fagor America:
This problem could be confusion over how to properly program an automatic cooking function. First, you must program the cooking duration, then you must program the time of day you want the food to be ready. Sometimes customers think they need to program a “start time” and an “end time” versus a “duration” and an “end time”. Please, make sure you are doing both steps correctly. Also, you should be aware that this clock works on the 24-hour principle (military time). I know that sometimes this confuses people as well. If both of those are okay, then it probably has a defective clock. If that is the case, please feel free to call our customer service:
UNITED STATES OF AMERICA and WESTERN CANADA: Please contact ADCO Customer Care at 1.877.743.2467, or by email at: [email protected]
EASTERN CANADA: Ontario, Quebec. Please contact A.G.I Service Inc: Telephone: 450-963-1303 or by email at: [email protected].

If you have any other questions do not hesitate to contact us at: [email protected]

Best Regards,

From the symptoms you describe, I would say the oven thermostat is faulty, and in need of replacement.
This is the control you regulate the temoperature with.
Hope this helps.

The clock is not available anymore. You could remove it and thoroughly soak in WD-40 and Then use a light oil on it after it's completely dry.

If you need further help, I’m available over the phone at https://www.6ya.com/expert/craig_3fa289bf857b1a3c

I had a similar problem - turned out the knob on the left by the clock was set to automatic instead of manual.