My polaroid tv remote isnt working

youtube has a walk-through video for this. RCA itself has a website for codes. Oneforall.com is another website you can check for codes.

• This is a code search remote. You do not need a code.

1. Turn on the the unit you want to program.
2. Now take your remote and hold the "code search" button.
3. While still holding the "code search" button press and release the "T.V." button on your remote.
4. Now wait for your "T.V." button to flash once and then release the "code search" button.
5. Now press on and off on the remote until the T./V. actually turns off. This may take a up to a hundred presses but when the TV shuts off the remote is set.
6. Use your newly programmed remote.

Regards, Tony

Doesn't appear to be a good way to do this without the remote, you can try to do a factory reset,

Factory Mode Procedure

1.Power on TV.

2.Press volume up and channel up buttons on the TV simultaneously and release.

3.Power off TV with remote or power button to exit.

If this doesn't work you can get a polaroid replacement remote here:

http://www.discount-merchant.com/Polaroid-RC-201-Remote-Control-p/remote-9039.htm

It is a long an tedious process, but I got the correct code, and my TV works fine. The following are the codes for Polaroids. Try them one by one, and you should find one that works

10765,10865,11262,11276,11314,11316,
11326,11327,11328,11341,11498,11523,11991,11992

Robbin

read here
http://www.fixya.com/support/t225581-code_polaroid_tv

10178 is the code they gave us for our RC-201

http://www.polaroid.com/service/userguides/ce/lcd_tvs/tla04011_ug_en.pdf The remote codes are at the end of manual

try here:

http://cgi.ebay.com/DYNEX-RC-201-0B-RC-201-OB-LCD-TV-REMOTE_W0QQitemZ350138109773QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item350138109773&_trksid=p3286.c0.m14&_trkparms=72%3A1209%7C66%3A2%7C65%3A12%7C39%3A1%7C240%3A1318%7C301%3A1%7C293%3A1%7C294%3A50

you may find it good luck

Try calling the Dish network customer support phone number. Only they can tell you the code for the remote you have, that matches the box you have.

If you have the manual for the poloroid it should tell you if the Polaroid is a universal remote and show codes in the manual. If no codes in the Polaroid manual then it is not a universal, so it can not be done.