My camera keep saying memory card needs resetting I did reset it but I keep getting the same thing
Can you check if the Write protect swith is on on the SD card. It means as I understand, you have to reset the swith to inactive state.
SOURCE: memory card is in camera(kodak c613) Camera
Make sure the card is fully pushed in; otherwise it could be the reader.
You could try to insert the card into an external card reader connected to a PC.
If it is recognized by windows, click "format".
If that works put the card back into the camera.
If it is now recognized, go to "menu" and format again with the camera.
If the card is not recognized, your internal card reader seems to be faulty.
SOURCE: Screen is saying Memory card is protected (reset switch on memory card) and it won't take pictures.
if you have tried to set the switch to unlocke on your SD card, and still have this problem, you may need to open your camera to check the SD card slot.
this tips might help:
http://www.myfixtips.com/blog/uncategorized/how-to-fix-a-%e2%80%98card-locked%e2%80%99-problem-125.htm
SOURCE: It says my memory card is protected
On the side of the memory card, there is a small slider that locks and protects the memory card from being overwritten. Yours may be in the locked position. Simply pull out your memory card form your camera and unlock your memory card by sliding the tab.
Hope this helps,
Andrew
Do not forget to vote.
105 views
Usually answered in minutes!
×