I can't figure out where to put the SIM card in the back of this phone
Typically the SIM card slot is located under the battery. you would remove the back cover, then remove the battery. you should see place to insert the SIM card. it is usually identified by looking for a metal square about 3/4" H x 1/2" W and the plastic where the SIM card is inserted has an 'engraved' image of a SIM card and the correct orientation. without knowing the exact model, it is difficult to give exact information. another resource is to do a google or youtube search asking the question you posted along with the phone model number. hope this helps!
SOURCE: I need to find out what my SIM PUk pin is to unblock my SIM Card
hi,
just call your network operator and provide them with your phone number and sim serial number, which is on the back of your SIM card. then they will provide you with the PUK code.
rate me if it solves your problem
SOURCE: my sim card doesnt work in my sciphone i68+
I see that this had been a while. The reason that your Sim cad doesn't work could be various: 1. Make sure that your phone is quad band, if it's a tri band then make sure that ATT works in 1900mhz. If it works only in 850 and your i68+ is a tri band, (which is not suppose to) then it will never work. As far as I know all i68+ original are quad band, some fakes i68+ are sold as quad band but are actually tri-band. 2. If you ATT sim card is a 3g card, it won't work either. These phones are not yet equip to work with 3g. I hope this clear up at least a little of your doubt with the Sciphone.
SOURCE: my phone keeps saying missing sim card or
whats your phones model number anyway check with this the sim card slot you put may be expanded there will be a small cap like enclosure on the sim slot try to bend it and again insert the sim the sim card should be holded tight or else keep a small paper on above the sim card and close the battery you get a solution. thank you
SOURCE: Phone won't read sim card
try this tricks.
1. get a pencil eraser.
2. take out your sim from your phone.
3. use the eraser by rubbing the surface of the contacts of your sim.
4. get some clean and soft cloth and wipe the contacts of your sim
and insert it back to your phone,
5. restart your phone.
or you may do one of these for trouble shooting.
1. get another unlocked phone and have your sim inserted there and
check.
***** if the other phone doesn't read your sim then replace it with new one or take it to your nearest network provider office and have it checked.
2. get another sim and insert it to your phone and have it read by your
phone.
***** if the other sim can't be read by your phone, bring your phone to your nearest service center and have it check, it can be a hardware failure.
363 views
Usually answered in minutes!
Hi Doug D., I want to help you with your problem, but I need more information from you. Can you please add details in the comment box? What model s?
SM-B311V UD
This is an old school phone and if it has a SIM card it is under the battery. There are you tube videos on it
×