TA code TA maintance req. code mean?

As previous to clear this counter until parts are renewed/replaced. Enter the simulation # * C * (C=red c key). Once in these service modes, do not change anything unless you know what you are doing.
on the keypad enter 24 and press the copy key. Then select 4 and the copy key. Now select Maintenance all at the top and select execute ok. press the systems key to back out of this 24-4 and press the yellow CA key. The machine should restart. You may encounter further codes after this like Dk or VK c,m,y. D* stands for the drum and V* is for Dev counters. these also can be cleared from with in sim 24.

TA is like the universal maintenance counter, on this model only one code is displayed at a time. hold the copy key to figure out how many copies have been made on your machine and then call your
Sharp dealer they can tell you what is do to be replaced.

I’m happy to help further over the phone at https://www.6ya.com/expert/ethan_e84416e0b13809d2