Timex Indiglo Analog Watch Logo

Related Topics:

Angela Camp Posted on Mar 25, 2014

Turn off alarm for Acqua Indiglo

Timex Indiglo Acqua - How do I turn off the Alarm as it won't go past the hour and minute stage. I have tried all of the fixes I could find to turn off the alarm and have been unable to do so. Could this be a battery losing power or just me not getting the instructions right?

5 Related Answers

Anonymous

  • 1 Answer
  • Posted on Jan 19, 2010

SOURCE: Alarm on timex indiglo won't turn off

It's just a cheap watch, one hit with a hammer and the alarm stopped.

Ad

Anonymous

  • 1 Answer
  • Posted on Dec 30, 2008

SOURCE: Timex Indiglo WR 30M

to turn off hourly chime on the times wr 30m, simply press (in any mode, i just use the regular clock mode) the start/stop button (top right hand button) once (for about half a second).
  if you don't hear anything, you've turned off the hourly chime!  if you hear two short beeps, you've turned on the hourly chime.    turning the chime off/on is cyclic.  if you press once and hear nothing, it's off.  if you press again, you'll hear two beeps and the hourly chime is now on.    a lot of times that button hits my wrist (i wear it on my left hand) by accident, and that's how the chime turns on and off.  i hope this helps someone.

Anonymous

  • 8 Answers
  • Posted on May 27, 2009

SOURCE: need setting instructions for date,alarm,etc on my timex expedition

http://assets.timex.com/manuals/index.html

Here is the link for all Timex watches and the appropriate manuals.
This should provide you with the information you require, if you have an issue not covered there I will try to find you more specific information.

Anonymous

  • 18 Answers
  • Posted on Mar 05, 2010

SOURCE: Timex Triathlon Alarm Chronograph User Guide

i suggest you reset your watch

Anonymous

  • 1970 Answers
  • Posted on Aug 18, 2010

SOURCE: Hello, I just bought a Timex Acqua with Indiglo

Depending on when you bought your Timex, you shouldn"t need a battery just yet, your Timex came with a good battery. Look under the stem (winder) for a small piece of plastic that is not allowing the stem to go all the way down, remove that piece of plastic and push the stem down and your Timex will start. Or if your Timex has buttons, look for a tab of plastic on the back cover, this tab of plastic is keeping the battery from (ground) a complete circuit remove this tab of plastic to start your Timex. Changeing the battery while fairly easy, you"d need jewelers screwdrivers and of course the new battery, Best Bet, look for a small watch repair shop in your area for the battery change.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3helpful
2answers

Alarm on timex indiglo won't turn off

It's just a cheap watch, one hit with a hammer and the alarm stopped.
187helpful
1answer

Timex 1440 sports wach chime disable

Press the mode button until the Alarm apears. Press the Start/Stop button to turn the alarm on/off and remove/add the chime. Whew! I had to figure this out after my 3 year old turned the chime on!
0helpful
1answer

TIMEX IRONMAN TRIATHALON DIGITAL WRISTWATCH

ANALOG TIME
Pull CROWN and turn to set HOUR and MINUTE hands. TIME AND DATE A. Press and hold SET. SECONDS digits will flash. B. Press SPLIT/RESET to set SECONDS to zero. C. Press MODE to select HOURS. D. Press SPLIT/RESET to advance hours digits. Go through 12 hours for AM or PM. E. Press MODE to select MINUTES, press SPLIT/RESET to advance. F. Repeat to set MONTH, DATE, DAY, 12- or 24-hour time display. G. Press SET when done. BASIC OPERATIONS Press MODE to cycle through CHRONO, TIMER, and ALARM modes. Press INDIGLO to illuminate watch face. In any mode, press MODE to view time display. Press any button to stop alarm or timer beeps. INDIGLO INDIGLO CHRONOGRAPH A. Press MODE until CHRONO appears. B. Press START/STOP to start. C. Press SPLIT/RESET to record lap time. Display pauses. D. Press MODE to resume display of lap and split time (automatic after 10 seconds). E. Press START/STOP to pause chrono. F. Press START/STOP to resume. G. Press START/STOP to stop. H. When timing is stopped, press SPLIT/RESET repeatedly to recall last eight lap and split times. I. Press and hold SPLIT/RESET to reset chrono. MODE MODE START/ STOP START/ STOP SPLIT/ RESET SPLIT/ RESET SET SET CROWN COUNTDOWN TIMER A. Press MODE until TIMER appears. B. Press SPLIT/RESET to select timer operation (Countdown and Stop; Countdown and Repeat; Countdown and Start chrono). C. Press SET. HOURS digits will flash. Press SPLIT/RESET to advance digits. D. Press MODE to select TENS of MINUTES. Press SPLIT/RESET to advance. E. Repeat to set MINUTES, TENS of SECONDS, and SECONDS. F. Press SET when done. G. Press START/STOP to start timer. H. Press START/STOP to pause, press again to resume. I. When timer is stopped, press SPLIT/RESET to reset timer. Watch will beep when countdown reaches zero. ALARM AND CHIME A. Press MODE until ALARM appears. B. Press SET to select HOURS. Digits will flash. C. Press SPLIT/RESET to advance digits. Go through 12 hours for AM or PM. D. Press MODE to select TENS of MINUTES. E. Press SPLIT/RESET to advance. Repeat for MINUTES. F. Press SET when done. G. Press START/STOP to turn alarm on or off. H. Press SPLIT/RESET to turn chime on or off. When alarm time is reached, watch will beep for 20 seconds, or until any button is pushed. Alarm will repeat every 24 hours until deactivated. INDIGLO® NIGHT-LIGHT WITH NIGHT-MODE® FEATURE A. Press INDIGLO to activate light. Patented (U.S. Patent Numbers 4,527,096 and 4,775,964) electroluminescent technology used in the INDIGLO® night-light illuminates watch face at night and in low light conditions. B. Press and hold INDIGLO for three seconds (beep will sound) to activate or de-activate NIGHT-MODE® feature. C. While in NIGHT-MODE® feature, press any button to illuminate watch face for 3 seconds. Chime on Alarm on If your watch is water-resistant, meter marking or ( ) is indicated. Water-Resistance Depth p.s.i.a.* Water Pressure Below Surface 30m/98ft 60 50m/164ft 86 100m/328ft 160 *pounds per square inch absolute WATER AND SHOCK RESISTANCE WARNING: TO MAINTAIN WATER-RESISTANCE, DO NOT PRESS ANY BUTTONS UNDER WATER. 1. Watch is water-resistant only as long as lens, push buttons and case remain intact. 2. Watch is not a diver watch and should not be used for diving. 3. Rinse watch with fresh water after exposure to salt water. 4. Shock resistance will be indicated on the watch face or caseback. Watches are designed to pass ISO test for shock resistance. However, care whould be taken to avoid damaging crystal.
3helpful
2answers

Acqua Indiglo watch

Can't understand instructions
Aug 31, 2008 • Watches
90helpful
3answers

Timex Indiglo WR 30M

to turn off hourly chime on the times wr 30m, simply press (in any mode, i just use the regular clock mode) the start/stop button (top right hand button) once (for about half a second).
  if you don't hear anything, you've turned off the hourly chime!  if you hear two short beeps, you've turned on the hourly chime.    turning the chime off/on is cyclic.  if you press once and hear nothing, it's off.  if you press again, you'll hear two beeps and the hourly chime is now on.    a lot of times that button hits my wrist (i wear it on my left hand) by accident, and that's how the chime turns on and off.  i hope this helps someone.
5helpful
2answers

My timex indiglo watch beeps on the hour. How do I take it off so it does not beep on the hour?

Thwat is the chime. Some how it must have been turned on. Somewhere on the watch you will see a little bell or wave figure )))) There is 1 of 2 ways that you chime can be turned off. The first way to try is to push both buttons on the right hand side at the same time that should turn off the chime or the alarm, but if you do it more than once it will turn off whatever wasn't turned off the first time you pushed the button, and if you push them again, it will go back to the configuration you started with. The second way would be to go to your alarm modeand push the button that is NOT your light button or your "mode" or "adjust" button and push that button, that should cycle through the charm and alarm as went through before. If you find that neither one of these ways work, send me the model # and I will get you the information you need. PLEASE if you still have problems let me know!! Good Luck!!!
88helpful
5answers

Acqua Indiglo water resistant watch with alarm 30m

Press and hold the MODE button (bottom left) for approximately 3 seconds.

When the Alarm set time starts flashing, press the MODE button once more. Now the seconds for the watch time should be flashing.

Use the START/STOP button (top right) to move bewteen items and the SPL/RESET button (bottom right) to change the item.

Moving between all items, it will take you through: seconds, minutes, hours, month, date, day of the week. Simply press MODE when your settings are complete.
Jul 25, 2008 • Watches
3helpful
2answers

How to set

in order to unset the military time on the watch you must hold down the two top buttons until the the 12 hour format comes back. in order to turn off the alarm you must hold down the two right buttons until they beep..and then the alarm will go off
Not finding what you are looking for?

1,092 views

Ask a Question

Usually answered in minutes!

Top Timex Watches Experts

Paul Bade

Level 3 Expert

1818 Answers

NOEL
NOEL

Level 3 Expert

8606 Answers

Ngoro

Level 3 Expert

3521 Answers

Are you a Timex Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...