How do I replace the touchpad on a Bosch microwave?

https://www.repairclinic.com/RepairHelp/Microwave-Repair/6-129--/Bosch-Microwave-Troubleshooting


https://www.repairclinic.com/RepairHelp/How-To-Fix-A-Microwave/66-129--/Bosch-Microwave-not-working


Bosch Microwave Not Working


I have not located that particular error, but often a part needs to be replaced, and you might have to pay for both a part and a technician to repair it. If so, it might be cheaper to buy another microwave.

If you can find a label somewhere, perhaps the back of the microwave, and provide the model number, it is possible to find more information on the internet or by calling a service before investing money in parts or repair.

try to unplug unit, then reset the clock or time of day, then try to operate

touch pad needs replacing not sure if can replace look online might get lucky

see the details and fix it. God bless you
Touchpad and Control Panel If the microwave buttons don't work the touchpad and control panel assembly are probably defective.

Touchpad If the microwave buttons don't work the touchpad might be at fault. Generally speaking, if the dishwasher display is working and some of the buttons respond correctly but some don't, the problem is with the touchpad.

User Control and Display Board If the microwave buttons don't work the main control board is most likely defective and will need to be replaced.

Main Control Board If the microwave buttons don't work the main control board is most likely defective and will need to be replaced.

see the details and proceed according. fix it. God bless you
Main Control Board If the microwave buttons don't work the main control board is most likely defective and will need to be replaced.

Main Control Board If the microwave buttons don't work the main control board is most likely defective and will need to be replaced.

Main Control Board If the microwave buttons don't work the main control board is most likely defective and will need to be replaced.

Touchpad and Control Panel If the microwave buttons don't work the touchpad and control panel assembly are probably defective.

SEE THIS CAUSES AND FIX IT. God bless you
Touchpad and Control Panel If the microwave buttons don't work the touchpad and control panel assembly are probably defective.

Touchpad If the microwave buttons don't work the touchpad might be at fault. Generally speaking, if the display is working and some of the buttons respond correctly but some don't, the problem is with the touchpad.
ser Control and Display Board If the microwave buttons don't work the main control board is most likely defective and will need to be replaced.

Main Control Board If the microwave buttons don't work the main control board is most likely defective and will need to be replaced.

see this causes and fix it. God bless you
Touchpad and Control Panel If the microwave buttons don't work the touchpad and control panel assembly are probably defective.

Touchpad If the microwave buttons don't work the touchpad might be at fault. Generally speaking, if the display is working and some of the buttons respond correctly but some don't, the problem is with the touchpad.

User Control and Display Board If the microwave buttons don't work the main control board is most likely defective and will need to be replaced.

Main Control Board If the microwave buttons don't work the main control board is most likely defective and will need to be replaced.

You are right the control panel is very expensive, you can try the filter to see if you can get it working, but I must admit a new microwave oven sounds appealing.

I am not familiar with the Whirlpool microwaves; however, I just had the same problem with an LG over the range microwave. Several of the positions on the touchpad quit responding to touch. In our case, it was the touchpad itself that was the problem.

The touchpad on our microwave was held in place with adhesive. We pulled it off and replaced it with a new touchpad. Everything works now. The only complication is getting to the connector which carries the signals from the touchpad to the microwave controls. We had to remove and dissassemble the door to get to that connector.

The touchpad cost about $26.00.

that sound comes from fan motor, please replace or service fan motor ..