- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
When not using the compartment as storage, the read seats can be returned to the upright position as follows. 1. Pull both sides of the seat up into their upright position. 2. Pull down the seat cushion until it is returned to the original position. 3. Return the head restraints to their proper position. You can figure how to raise the Dodge Caravan rear seats by taking a look as to how they are lowered and locked: https://sherrychrysler.com/dodge-grand-caravan-how-to-fold-the-rear-seats/
I'm guessing that you are referring to the wheel guide on the floating panel. You may have to remove the door completely in order to re-install it. At the pivot points (upper & lower) next to the jam; the upper one may or may not be spring loaded, the bottom one is threaded usually with a beveled head with teeth on it. You'll need a flat-bar or someone to lift up on the door as you thread the pivot bolt back into the door, allowing enough play to pop it off of the seat plate. The bi-fold will have to be open(the panels flat across). Tilt the bottom of the doors out, this will allow you to re-set both the upper pivot in its bracket and the guide roller on the floating panel in the track at the same time. Re-position the doors in the opening with the lower pivot over its bracket and re-adjust(thread down) the lower pivot until it holds the door up in the track. (Take care as to the position of the lower pivot in its bracket as it also adjusts the clearance for the door to swing/pivot next to the jam!!) {The upper pivot bracket(in the track) can also be adjusted for closeness to the jam}. It is important that these pivot points be plum(straight up& dn) They can cause the bi-fold to tilt; or cause the roller guide on the forward door to either move up, or dip down as it travels out to the open position.
The upright stabiliser is designed to lower and lock into place automatically when you raise the handle. If it doesn't seem to be doing this as usual, please call our Helpline on 0800 298 0298 (UK), or 1-866-693-9766 (US) so we can provide further assistance to resolve this.
if you can hear the motor working but the winodwo is not coming up then it is probably out of the track.. there should be only a few screws holding the door panel on. remove it and put the window in down position. Then you can use your hands to work the window up. When you get it in the up position you can see through the door where the tracks are. Just lower the window back down in the tracks. But first put some good adhesive or silicone in the very bottom track that the windows rests in so that the window will stay attached to the bottom track.. once you have done that, raise the winding using the switch and leave the window in the up position until you are sure the adhesive is dry.
Yes, after you push the start button on the unit, pull the plug out of the wall socket when the arm gets to its bottom position. It will stop at this lowered position. When you plug it in again, it will go back to its upright position. Norelco ships the new cleaning units in this contracted position. When you plug it in presto! You are ready to go.
Make sure the back (where the baby places his/her back) of the seat is all the way upright. There is a cord on the back of the seat which you can adjust to move the seat to a fully upright position or down to a "sleeping" position. This will give you maximum space in which you can place items below. This is the only way... There is no way to lower the storage compartment - believe me, I've had the product for two years.
×