Tried unlocking samsung g600 and imei is now zero's

Your imei number is also under the battery.


www.usedcellphoneshop.com

Hi tried to unlock my phone by using the Unlocking code...after entering the code...my IME came to 00000000000, please help me out of this problem.....It iwll be your great favor

Hi there,

First you will need to obtain the IMEI (serial number) for your handset. Type *#06# from your handset. The number that appears is the IMEI. Once you have this number you need to contact the Mobile Operator Customer Service department or use an online Subsidy Unlock service.


The phone must be in portrait mode. Once in portrait mode hit the Dial button on the touchscreen.

Type #7465625*638*Unlock Code #.
(Unlock Code is a unique 8 digit number).
Device will reply: Network Lock Deactivated.

Thank you for using FixYa! Have a nice day and please remember to rate this solution.

Warm regards,
BearWeb

you will need to reflash the phone with a clean version of the firmware.
it appears the unlocking solution did not work properly.
it should not have changed the imei.
the imei is how the phone communicates with the carrier.
i would go to some place that you can stick another sim in it and see if the sim is bad.
but chances are the solution to unlock bricked the phone.
Reflash it and use an unlock code from a reputable company.

You could try go to the phone service provider that you wish to use.
They may be able to assist you.

You may try default phone and security code to remove restrictions.
ur defalt phones codes is 12345 or 00000 u can use it
Default 4 Digit user code: 1234 or 0000
Default 6 Digit Security code: 123456 or 000000

Type *#06# at the mobile screen to know IMEI no of your mobile.
send the IMEI no to me and i will reply you with unlocking code.
IF Problem not Solved So
Please New Software install in the Phone Problem will Solved

that is a very wierd problem. the person who unlocked your phone must have changed your imei. i dont think it will affect performance of the phone in any way

i had the same problem, take it into ur nearest service station and they will rebuild the imei for £20

The following worked fine on my Samsung SGH-G600 which was on 02 and now can be used with any sim:

*7465625*638*00000000*00000000#
NEXT ENTER
#7465625*638*00000000#
AND THEN *#7465625# to check the locks....all locks are inactive...these are all the locks...
network lock - inactive
subset lock - inactive
sp lock - inactive
cp lock - inactive
sim lock - inactive
activa lock - inactive
phone lock - inactive
auto network - inactive
auto subset lock - inactive
auto sp lock - inactive
auto cp lock - inactive
auto sim lock - inactive

JohnJ

switch the phone on without a sim card,
type in *2767*2878# WAIT for it to reset,
once it boots up itself, the phone code is now gone,
if the phone is asking for a SIM LOCK password
then send it to someone who has the equipment to unlock it