Incident 077 312

fixya site doesn't have cashiers
so get the correct site and use the contact us section

Charlie Murphy confirmed that both stories he told about Rick James and Prince are true stories. As seen in the sketch, Rick James confirmed most of the basic details of the incidents in the sketch about him. Prince has also said in an interview that the story about beating Eddie Murphy's entourage in basketball is true.

Enter the function using the Y= editor. Pressing [ 2nd ][Graph] (table) will display the table. You can then press [GRAPH] to see the grapg. If you want both graph and table side by side use the split screen feature.
To do so press [Mode]. Scroll down to the last line Full Horiz G-T. Highlight the option G-T. Press the Graph key.

Please go to the link below to see the periodic table. Incidently, it is Helium that is the lightest and that
why it is filled in baloons.

http://64.224.111.143/handbook/periodic/

Press [2nd][+] (MEM)
Select [4:ClrAllLists]
Press [ENTER]

Now you are ready to create a table from the expression of a function.

Press [Y=] to open the function editor.
On line Y1= enter the expression of the function
Press [2nd][GRAPH] (TABLE) to create your table
You will see two lists X, and Y1.

If your table is not generated from the expression of a function, but from raw experimental data, you use the [STAT][1:Edit] key sequence to open the Lists L1 to L6 and populate the two you want.

Hi,
In the Y= equation editor you can enter two functions, and graph them both or calculate a table for both. However, the two functions will be evaluated at the same values of X.

Rather than trying to guess what is happening, I will show you how to get your two tables.

If you have used one the applications Inequalz or Transform it si probably still stuck in memory, and you must unload it from the RAM before recovering the usual calculator behavio(u)r

1. Press the [APPS] button, find Inequalz or Transform, point to it and click [ENTER].
2. You will be asked to Continue or Quit the application.
3. Press the number corresponding to Quit (usually 2).
4. Press [2nd][Y=] (STAT PLOT). Press [4:PlotsOff][ENTER]
   
5. Calculator replies Done.

Open the [Y=] equation editor. Type in your equations. Press [ENTER] at the end of each equation. Verify that the [=] signs after Y1, and Y2 remain highlighted when cursor is moved away from them.
Press [2nd][GRAPH] (Table) to see your 2 tables y1 and y2 calculated at the same X.

Hope it helps.
Thank you for rating the solution.

ti 83 is a crappy calc. may i recommend a casio

sounds like one of your ignition coils are starting to fail, try and find a good price for all 6 on ebay

MIL (check engine light) "ON" with DTC P1320 stored in the ECM Intermittent spark knock (detonation)

Check the ECCS wiring harness for a broken or damaged wire.

1. If the ECCS harness has a broken or damaged wire that is causing the symptom(s) noted above, repair the harness and verify the incident is resolved.
2. If the ECCS harness does not have a broken or damaged wire and is NOT causing the symptom(s) listed above, proceed with step 3 below.

Replace ignition coil(s) with the one(s) listed in the Parts Information table, and verify the incident is resolved.

Safari fully passed Acid3 test (http://webkit.org/blog/280/full-pass-of-acid-3/) so, how Safari showed width of your table is how you designed table width...