Network cable unplugged

Unplug power from router for 2-3 mins and try again

First, you need to know what's IP of Router and your Camera (or DVR). Then browse to IP of Router and setting up NAT port (or port redirect. If cannot you can give me your Skype, I will help you more then here.

It is on your router and is used to pair with a new Bluetooth device. Most are easy to find but my Belkin hides it in plain sight by placing it on a tiny tab next to the pilot light.

What lights are on and what lights are blinking? If you thnk it's a problem with your ISP, did you call them so they can diagnose their line?

Hi,

Do you experience problems with other WiFi hotspots?

Windows Vista is a old version of operating systems, you facing a problem with your router can not connect with your Vista PC. DON'T WORRY uninstall Windows vista and again install Windows 10 latest version on your pc and already troubleshoot router not connected your pc problems. OR Call Windows support number USA 1-844-602-3987 (Toll-free) and find instant support.

system light must flashing every second or one second . that is mean the system work correctely . but if the light was flashing rapidly , i think there is problem with system .
reset router , if the light keeps flashing , change the router

Most routers have a reset in the back. Hold it in till it cycles. This will clear all custom settings, and load defaults like new.

One question, is... do you need to enter a KEY or is this an open network?
I have found that with a new computer, you need to do the following to connect.
If this is an open network, then leave your router running, and just do a cold boot with your computer.
IE: Shut down, count to 10, and then re-start.
You may also need to connect (by network cable) to your router and make sure the wireless is turned on.
Most new rountes start with the wireless disabled.

hello!

-- what is the operating system of your computer?
-- is this working fine before or is this a brand new router

you may try this and see if this help solve your problem. make sure your computer is directly connected to the router

Step 1: Shutdown the computer.
Step 2: reset the router while power on then Unplug the router’s power cable.
Step 3: Unplug the Broadband modem’s power cable and wait for 30 seconds.
Step 4: Plug in the Broadband modem’s power cable and wait for its lights to appear stable.
Step 5: Plug in the router's power cable once the modem’s lights appear stable.
Step 6: Power on the computer on
Step 7: test the Internet connection on both pc

if this still didnot work, upgrade the firmware of your router