Service error 140.10 transport motor

Check out the links

Error Codes > Ricoh > MPC305SPF > Code 524

Printcopy.info https://printcopy.info > brand=Ricoh > code=524
Code: 524 ; Description: Transport motor error. The machine detects a High signal from a transport motor lock detection for 2 seconds after the transport motor ...

Missing: 1600. ‎' Show results with: 1600.

RICOH Error Code List - mtechsinfo.com

mtechsinfo.com http://www.mtechsinfo.com > files > Ricoh Erro... PDF Image compression errorHard disk drive error Aficio 551, 551P, 700, 700P SC- ... SC-524. Duplex end fence drive problem. SC-530. Bypass motor locked or fuse FU106 ...
14 pages

Error Codes > Ricoh > MPC306 > Code 524-00

Printcopy.info https://printcopy.info > brand=Ricoh > code=524-00
Code: 524-00; Description: Transport motor error The machine detects a LOCK signal from Transport motor for 2 seconds when the motor is activated. https://www.google.com/search?q=Ricoh+Aficio+MP+1600.+Error+SC+524

and finally
https://www.mtechsinfo.com/files/Ricoh%20Error%20Code%20List.pdf

..

Technology Time: Toshiba Error codes

www.mytechtime.com/2011/04/toshiba-errors.html

Toshiba E-Studio machines do not display service code automatically. ... All codes, except fuser errors are reset by turning the machine off and back on again. ... holding down "0" and 8" keys, enter 251 to set PM limit, and 252 to see the number of copies that have been run since the last PM. ...Toner transport motor problem.

C 0010H - Color PC drum malfunction.Check the motor for proper drive coupling and correct as necessary.Check the motor connector and the electrical board connectors and the mechanical transport drive components(gears,couple).

http://support.lexmark.com/index?page=content&locale=en&productCode=&segment=SUPPORT&clearQuestion=Y&userlocale=EN_US&id=SO1912

Quoting from support.lexmark.com above:

Problem

Error: "936 Main Drive Motor"; Error: "936 Transport Motor"; Error: "937 Main Drive Motor"; Error: "937 Transport Motor"

Environment

The 936 and 937 error codes indicate that the printer thinks there is a problem with the main drive motor.

Solution

1. If your printer is posting one of these errors, turn it off and let it sit powered off for at least a minute.
2. While the printer is off, open all of the doors and covers on the printer. Also remove the toner cartridge. Make sure there is no paper jammed in the printer. Pay close attention to the area where the toner cartridge sits. The main motor is located just to the left of the toner cartridge.
3. If nothing appears to be wrong with the inside of the printer, reinstall the toner cartridge and close all the doors and covers. Now power the printer back on. If the error does not return, try printing again.
4. If the error does not return when you print, continue using the printer. If the error does not return after a few days, this may have been an isolated incident and the printer should be fine.

Hi If you Tel me the Serial Number of you Machine I probably will be able to help

6202 error code means that the scanner motor failed

to solve this

-Open the printer access door of your printer
-Unplug power cable
-then after 30secs plug the power able back
-If the printer is already power-up the message printer access door will appear
-Close th printer access door
-try to scan or print

If this issue not solve call tech support of kodak Toll free 1 800 421 6699
-

That's a main motor error, something could be jammed in transport, or a generic toner cart. that is too hard to turn, try powering on with toner removed...

This error code refers that your motor is not functioning properly. You better go for servicing or support from the service center. For more error codes and causes, you can check out this link belowhttp://www.theprinternetwork.com/printthread.cfm?Forum=116&Topic=1275

If the sorter has a problem, disable that option by command 26 print 01 print and enter 0 enter.

try a new transfer unit.