Need a repaire company in australia for night vision goggles nzt 22 russan goggles

14 CFR 61.1 (b) (12) and (13) Definitions-Night vision goggles and operations. 14 CFR 61.31 (k) Additional training required for night vision goggle operations. 14 CFR 61.51 (k) Logging night vision goggle time. 14 CFR 61.57 (f) Night vision goggle operating experience. 14 CFR 61.57 (g) Night vision goggle proficiency check. 14 CFR 61.195 (k) Training for night vision goggle operations. 14 CFR 91.205 (h) Instrument and equipment requirements for night vision goggle operations.

If there is one available, these folks should have it or one similar.
[email protected].

The complete name is

Kalinka Cyclop 1-V NZT-1M2 Monocular

Was the battery in it for a year? If so, look at the battery terminal and see if there are corroded. If they are clean them until the are cleaned of the corrosive substance. Then try it with a new battery that is the correct size. stewbison

Letto, This PVS-7B has a generation II image intensifier tube in it. The image tube is manufactured by ITT liton company. The only way to fix this wonderful NV devise is to send to ITT Night Vision Company. They are listed in the internet. Unless you can find someone to work on it, but the really need to know what they are doing. stewbison

http://wize.com/reviews-night-vision/amt-mo2-1-user-manual

Go to Miltonius, click impossible enpowered items of miltonius, or the sword of miltonius, and accept the quest twisted items of miltonius. Then you get essences of miltonius by defeating Makai. When you get 100 essences go to miltonius and click totems of miltonius quest. Turn in essences for a totem. You need 3 totems to get the crimson plate

This is by design. You can replace it with a toggle switch from radio shack. You will need to know how to solder.

It's probably the capacitor, or the pushbutton energizer.

It's really easy to dis-assemble this unit, and it works really well for a $100 night vision scope.

You can replace the pushbutton with a toggle switch from Radio Shack.

Check l that the HV is present at tube. If it is, suspect tube. If not, check the HV circuit - these vary, but most competent electronics trained technicans should be able to fault find on these.

go to google then click on shopping it is the best way to get items hope this helps.