Thomas water tower - Thomas and Friends Toys

Unscrew the screw under Annie, then pull on the top part of Annie to reveal another section where more batteries go. put water in the hole on top of Thomas, not the funnel, but there's another small hole on the top of Thomas. Now Thomas will puff steam! You are lucky to have found this train, he is super fast and very unique because he puffs the steam! we have one, unfortunately my youngest son broke the chassis that connects Thomas and Annie, so it no longer works properly. You will need a dropper to put the water in Thomas.

I am having the same problem with our control steam sounds thomas train. I've been searching to no avail. If anyone can help me please leave me a message thank you!

To start, you need a TA27 triangle driver bit to remove the handles. Then pull hard straight up on the top block with the face on it. It will separate from the tower. The rest is straight forward. I have some choice words for the person who designed this thing...

At the top of the float arm there is an adjustment screw to set the water level.

Starting at the wood cut tower moving clockwise. Tower is 6. 6 to 7 to 8, L2, 9, L4,10,L5,11,fits into tree trunk, 14, (12 connects to the junction) 1, 2, (joins to 13 from the log over.) L5, 3, L4, 4, L4, 5, connects to 6, the tree tower.
The logging tower rails. Connects from 4 to 18, then the tall tower, the rail, the small tower, 17, L2, 16, L4, 15, the tall tree tower, 14, L4, 13 and that connects to No. 2.
L2 is the lowest support. L4 is the middle size. L5 is the tallest.

Just increase the length of the chain so the flapper valve does not have time to close too soon.

http://service.mattel.com/instruction_sheets/R9634-0920.pdf

http://www.tomy.co.uk / webcare / product-instructions / track-master-tmrr-instructions /

http://www.tomy.co.uk/webcare/product-instructions/track-master-tmrr-instructions/

I had the same problem finding a Water Tower laying in the bottom of the dishwasher. Solution is to simply lift the bottom rack and insert the tower into the center-most square hole. Twist the tower with the large lip on the bottom of the rack and the two plastic pieces will overlap two sides of the square hole. It will come lose again in time, but just reset it again.