I hope this will help. It shows locking and unlocking ids while scanning and while in a bank.
Locking/Unlocking IDs
Contents
You can lock out IDs you don't want to hear such as telemetry, MDT's, dog catcher, etc.
To Lock out an ID while scanning, quickly press
L/OUT while the ID is displayed.
To Lock or Unlock an ID manually:
1. In Manual mode select
any channel of the bank you want to lock or unlock an ID in by entering the bank number and channel number (Ex: 001) then press
MAN to advance to the channel.
2. Press
PGM then
TRUNK to put the scanner in program and trunk modes. You will see the bank number (
0-9), list number (
0-4), and the list status (
ON or
OFF) on the 1st line, the ID# in the list (
0-29) on the 2nd line, the
ID on the 3rd line, and
bank tag on the 4th line (if programmed).
3. Press
TRUNK (each time) to select the ID list (
0-
4).
4. Select the ID# (
0-
29) by pressing
or
(or press and hold; faster) then press
L/OUT to lock or unlock the ID. An
L will appear to the right of the ID# if the ID is locked out.
5. Press
MAN to exit programming.
To Unlock IDs in a bank:
1. In Manual mode select
any channel of the bank you want to view the locked out IDs in by entering the bank number and channel number (Ex: 001) then press
MAN to advance to the channel.
2. Press
PGM then
TRUNK to put the scanner in program and trunk modes. You will see the ID list.
3. Press
FUNC then
L/OUT (each time) to view the locked IDs. Press
L/OUT to unlock the ID. The next locked out ID will appear.
4. Press
MAN to exit programming.
Note: You cannot unlock all IDs at one time.
×