Question about Nor-Lake Refrigerators

Open Question

What does P1 error code mean?

P1 error code with Dixell controller?

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 6 Answers

SOURCE: P1 error code on LX30 Hobart

This is a bad sump temperature probe. The unit will function, but will not heat nor display the wash water temperature.

This is a very easy fix. Order Hobart part number 328994 from your nearest Hobart parts dept.

Turn off and drain the unit. Kill the power to the unit at the circuit breaker. Remove the lower front cover. Locate the screw-in temperature probe at the front of the sump. Unplug the sensor from the wiring harness, remove with a 7/16" open end wrench. Screw in the new probe, using teflon tape of the threads, snuggly. It does not need to be super tight. Plug it into the harness, reinstall the front cover, turn the breaker back on, and start up the unit.

TURN THE BREAKER OFF AS EVEN WITH THE UNIT "OFF" THERE WILL BE 120 VOLTS PRESENT AT THE SUMP HEATER (yellow wires) DUE TO ONLY ONE LEG OF POWER BEING SWITCHED OFF!

Posted on Sep 12, 2009

Testimonial: "You were right! can you help mr with a P2 error code?"

Ad
  • 83 Answers

SOURCE: What does error code P1 mean?

Hi Mike

P1 is air probe faulty

Regards

Gordon

Posted on Apr 20, 2011

  • 75 Answers

SOURCE: my ducted air conditioning has an error code on

Hello
Check that the filters are clean and check that the sensor is still in place if all is check and still gives error code then the sensor is faulty.
Thanks

Posted on Jun 04, 2011

panza83
  • 15 Answers

SOURCE: What does P1 mean

t appears to mean "defrosting." In other words, the condenser coils have gotten too cold and are icing up..


The filter is probably full, or the thermostat is faulty. Open it up and clean the filter first.

Posted on Sep 17, 2012

  • 5 Answers

SOURCE: I get a P1 error

just clean shower head or faucet with CLR to increase water flow. I have same problem

Posted on Oct 24, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need help with dixel control


http://www.emersonclimate.com/Documents/Retail%20Solutions/XR35%20Manual.pdf

Dixell

The first link is to a specific manual. The second is to the Emerson Dixell site where there is support and resources. If the site does not provide what you need, try googling by brand plus model plus troubleshooting.

Jan 06, 2018 | Televison & Video

1 Answer

Blue star Visi cooler subzero error code p1


Amazon.com: Questions And Answers: WHAT DOES THE P1 error code mean??

www.amazon.com/.../ref=ask_dp_dpmw_al_hza?asin...
Amazon.com, Inc.Oct 19, 2014 - Hi David, According to the manual: "P1- Unit is defrosting-- Allow the unit time to automatically defrost. The error will clear after the unit self ...

Jul 26, 2015 | Dehumidifiers

1 Answer

Uline Echelon Ice Maker P1 error code


P1 is a indicator of a slow or clogged drain check to make sure that every thing is draining good if line is clear make sure pump is coming on to pump the water out of the bin. once all is clear unplug the unit for an hour then plug back in this will clear code unless you still have a drain issue.

Jan 17, 2014 | U-Line Icemaker

1 Answer

I have a polar wind portable air conditioner/dehumidifier/fan with swing louvers model # MPN4-12CRN1-BH8 I cannot get the protection code P1 to go away do you have any suggestions? When I first plug it in...


Check the back of the manual that came with it. I find two things for a P1 Error.

Midea AC "R" Series Error Display = P1
Error Code Definition = Over voltage or too under voltage protection

On a portable unit
P1 or H8 - Water reservoir is full.

Oct 22, 2017 | Heating & Cooling

1 Answer

Spt 65 pint error code p1


According to the manual, this code, P1, means that it is in a defrost cycle. I now have the problem that my unit is in the P1 mode as often as it is in the dehumidification mode.

May 15, 2012 | Sunpentown 65 Pint Dehumidifier with...

1 Answer

Hobart am-15 ml-130038 displaying p1 error


I replaced the probe temp according to error code P1 but the display still shows error P1. Is there any suggestion for further troubleshooting?

Nov 08, 2011 | Hobart 29 in. AM15-1 Free-Standing...

2 Answers

Why get a P1 error code on my Rheem tankless RTG-64xp?


1) I cannot find Rheem error code P1
http://www.palomatankless.com/owners/homeowner+trouble.lasso
http://www.palomastore.com/paloma_error_codes.html

2) BOSCH does not show P1 either:
http://www.boschhotwater.com/HelpfulResources/TechnicalSupport/BoschAquaStarModels/2400ESTechSupport/Troubleshooting/tabid/1295/Default.aspx

3) Best I could find is that folks with P1 error code report tankless fires for short period, and then turns off.
This implies air, fuel or vent problem, and can be internal, external or combination.

4) P1 appears frequently on control board descriptors, which might imply the error is control board malfunction.

5) Call Rheem 1-800-432-8373, and then add a comment to this thread and let folks know what you discover.

6) I will also call Rheem when time permits, and post what I discover.

Add a comment for more free help.
Also take advantage of fixya expert assistance live.
For a price, expert works with you while you work on water heater or any do-it-yourself project.
Fixya is always less expensive than a service call.

Mar 05, 2011 | Rheem Water Heaters

2 Answers

HOBART AM15 DISH WASHER ERROR(E1)


After checking the service manual, I find no code for E1. There is a P1, or other E codes. Please list ML number.

Jun 14, 2009 | Hobart 29 in. AM15-1 Free-Standing...

2 Answers

P1 error code


Take out your filter and clean it, if its dirty your machine can frost up due to the lack of air flow and will not work correctly. Once you clean it, it should be fine.

Sep 13, 2008 | Danby DDR2506 Dehumidifier

Not finding what you are looking for?
Refrigerators Logo

Related Topics:

781 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nor-Lake Refrigerators Experts

Marvin
Marvin

Level 3 Expert

84964 Answers

Marat Brikov

Level 3 Expert

489 Answers

Are you a Nor-Lake Refrigerator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...