4d result singgapore - Rolex Watches

Go on Google and do search engine on this issue. I have had numerous questions regarding many topics and I've never been let down going to this site for solutions. I've used this site for over 9 years and I am still using it with positive results. When You go on the Google Website under Search Engine Indicate "How do I fix time on Sketchers Watch STTSR002? And see what You come up with? You may have to use similiar words if it doesn't come up with initial result but I'm sure You will find a solution as I have the many times I've used Google. I think it's the best search engine out there. I don't own stock in the company or anything else but I'm just saying that I have always gotten my solutions answered.

try this link below
http://www.watch-band-center.com/watchstrap-s244h243-CASIO-Straps-Synthet.html

http://www.nooka.com/instruction-manuals-wp-1562.html Follow instructions after manual download.

Remove and reinsert battery.If no result,proceed as follows:
Use a watch tweezer with sharp endings.Remove watch back cover.You will see somewhere on the watch chassis "AC" engraved.There is a hole with contact at the bottom next to "AC".Gently,put one leg of the tweezer touching this contact and the other leg touching the chassis,instantly.Check the display.If no result,try again.This short-circuit/ground will activated the internal circuit and the watch will start working.If you do not have tweezer,you can use 2 watch repairer screw drivers,as well.

Most of my repair does'nt have a manual,all i do is to sure that all,the function button is working.then proceed to try all the function to work and observed what is the result.that watch three sitting of the crown by pulling,first pulled little then wind left and right and observed,second half pulled,then wind again third full pulled for hands function.Try this and you find the result. Hope it may help you; Regards VOTIT

Most of my repair does'nt have a manual,all I do is to sure that all,the function button is working.then proceed to try all the function to work and observed what is the result. That watch have one sitting crown by pulling,first pulled little then wind left and right and observed,second half pulled,then wind again third full pulled for hands function.For the buttons for setting is need to be long press then go to menu and the right button the up and down is for scrolling . Try all the setting this cannot damage the watch and you find the result. Hope it may help you; Regards; VOTIT

You can distinguish real or fake.the real is heavy than the fake,fake is lighter.the color the real one is not to shine is dull,the fake is very shiney compare to real,the metal they use the real uses stainless,titanium and gold.The fake is nickel plate or zinc metal.the engraving the real is deep seated engraving,the fake is on the top only not so deep.I can't say your watch is real or fake,basing on serial number,the emitator can emitate the number.I gave you a tip how you know the real or fake.

This is the link;
http://assets.timex.com/instructions/w225instr.pdf