-
Expert
149 Answers
- Posted on Jun 12, 2009
Re: won't finish spin/drain cycle. was beeping and
Long drain? remove lower cover on front..3 screws across bottom edge. there is a screw-on cover to a clean out. has a screen in there and may be clogged. prepare for a lot of water..u might lean it back against the wall to limit the mess. clean out is white plastic right up front.
I took off the kick panel and unscrewed the plastic clean out. I didn't see a screen of any kind. There were holes in the plastic part that I pulled out but nothing blocking it. I can now get it to spin but at the end of each cycle, wash, rinse, spin, I have to unsrew the clean out, let all the water run out and then move it to the next cycle. Any thoughts what else could be the problem. Is there another place to clean out where a clog could be?
Also, the suds error has come up and H F
×