Parental control passcode for mitsubhi dvd3s3b

To cancel the passcode on a Surf Onn tablet through the parental control settings, you will need to follow these steps:

1. Open the tablet's Settings app.
2. Scroll down and tap on the "Parental Controls" option.
3. Enter the passcode for the parental controls.
4. Tap on the "Set Passcode" option.
5. Enter the current passcode and then leave the "New Passcode" and "Confirm New Passcode" fields blank.
6. Tap on the "Done" button to remove the passcode.

Keep in mind that the steps for canceling the passcode on a Surf Onn tablet may vary depending on the specific model of the tablet and the version of the operating system that it is running. If you are unable to follow the steps above or if you are having trouble accessing the parental control settings, you may need to refer to the tablet's user manual or contact the manufacturer for assistance.

If you forgot the parent passcode/lock code you can reset it by following these instructions: Forgot Parent Lock code on LeapPad

Try to follow this instruction:
1. Press the menu button in your remote control. 2. Press number 4 to open the v-chip parental control 3.Press and hold the volume down and channel up buttons for 5 seconds if the passcode appears. This will reset the passcode 0000 then enter this to access the parental control. Good day and best regards.

Follow these steps:

1. Turn on the PlayStation 2 and remove any disk that may already be in the device. Then insert a DVD, preferably one that will prompt you for the parental control code. Insert the code and allow the DVD to begin playing.
2. Press the "Select" button once the movie has started. This will bring up a menu. Find the "Settings" icon, and press "X" to enter the "Settings Menu." Scroll down and select the "Parental Controls Menu" and press "X."
3. Reset the "DVD Parental Control Level" to "Off," which will allow any DVD to play without prompting the user for the passcode. You may also choose to set it to level 8, which is the least stringent level.
4. Do not exit the menu after inputting the new settings. Instead, eject the DVD and remove it. This should cause the PlayStation to reset with the new settings enabled. If it does not automatically reset, then manually reset it by either flipping the switch in the back, or by holding the reset button in the front down. Leave the device off for a few seconds.
5. Turn the PlayStation back on and input a DVD that previously required the passcode. The PlayStation should now play the DVD without prompting you for the passcode. If it does, then you're finished. If it still prompts you for the passcode, then start again at step one and try it again.

Go to "Settings" and highlight the "Parental Control" option. Then, press X, Y, L (left trigger), X at the passcode screen to reset the parental control setting to the default value.

You can go to your set up menu to change the settings for your parental controls. However, in order to do this you must first remember your passcode, something I could not do!!! I found that if you are prompted to enter your 4 digit passcode and instead you hit the "setup" button on your controller it will take you to a screen that reads delete passcode. Here you enter "7444" and then it will prompt you to enter a new passcode. Enter something simple and easy to remember. With this new passcode you can go to settings and then change the level or turn off the controls all together!!

Go to "Settings" and highlight the "Parental Control" option. Then, press X, Y, L, X at the passcode screen to reset the parental control setting to the default value.

Go to Settings
Highlight Parental Control
When the screen pops up that says Enter Pass Code press: X, Y, Left Trigger, X

You'll be taken to the parental controls screen where you can disable the passcode previously entered.

Go to "Settings" and highlight the "Parental Control" option. Press X, Y, L, X, at the passcode screen to reset the parental control setting to the default value.

For which system? If it's an Xbox, go to "Settings" and highlight the "Parental Control" option. Press X, Y, L, X, at the passcode screen to reset the passcode to default settings.