I need to repair a broken screen on a DELL W4201C 42" High Definition HD Plasma TV and I live in Columbus ohio?

SOURCE: Is Dell W4200HD Y-Main board and Dell W4201C HD Y-Main board compatible

The port locations do not seem to line up the same so I'm pretty sure they are not interchangeable

http://support.dell.com/support/edocs/systems/w4201c/om/OM.pdf

http://support.dell.com/support/edocs/systems/W4200/W4200UG.pdf

It can be worked on by a local TV repair, then TV was made for Dell by Philips

SOURCE: 42 in dell plasma, no picture, sound works fine

tellme the solucion charge me

SOURCE: dell w4201c hdtv plasma tv BLACK SCREEN, LOGO FADES OUT, SOUND REMIANS, HELPPPPPPP

the problem was the y-sus board, i had a local tv repair shop diagnos that much for me. although, he couldn't fix it i did some research and found a company in california, itritek.com, who could. you send him the y-sus board and the two buffer boards and he not only repairs them but he upgrades them. apparently the y-sus board gets too much heat and eventually goes out, sometimes the buffer boards are affected too. itritek.com replaces the components on the y-sus board with better parts which are more heat resistent. i believe this will help you with your problem. let me know...good luck.

SOURCE: help

the problem can be traced from the power bd. you will need a digital volt meter. There are settings located on a sticker located on the upper right corner Va,Vset,Ve, Vset etc..... each one has a DC voltage. compare the voltages to trace the source. My suggestion from experience is the Y Main upper or lower buffer which ever has a brn mark located on the metal of the panel. Google a local dell dealorship or a repair company in ur local area, and get serviced.

SOURCE: 42" Dell plasma TV

Y SUS and Buffers are usual culprit.
You can get it from guy at
[email protected]
He has everything for Dell TVs