The hand wheel is just too tight in my sewing machine, comparing to other sewing machines,and the machine wont start when I press it lightly ,instead it makes some eeeee.. sound. Please help me out ?
It sounds like she's binding up. probably needs a good clean out and a generous lube
Make sure that the thread is not getting caught on the handle. I was having the same problem and tried everything only to find that my thread was caught.
SOURCE: sewing machine
Simple solution..
take the thread off your machine, set your tension to the middle setting. rethread your machine up to the needle. before threading the needle, put your presser foot down. If your thread pulls hard, then the machine is threaded right. If it pulls easily, you need to chead the thread thru the tension wheel.
Kelley
Rule of thumb.
Loops on the bottom, problem on the top.
Loops on the top, problem is on the bottom.
SOURCE: please help..I own a prelude singer sewing
Instructions on oiling your hook (the only area suggested for the user to oil) is located on page 40 of your instruction manual.
SOURCE: Demo for Singer 8280 sewing machine
Your machine can be found on the Singer web site here: http://new.singerco.com/products/detail/1337
There are links to instruction manuals and accessories on that page. You can also post in the Reviews and Question/Answers section on the bottom of the page to solicit feedback and help from Singer experts and other users.
Hope that helps!
309 views
Usually answered in minutes!
×