Question about Sharp SF-2025/2030 Copier Toner Black SF-230T1

1 Answer

No fonctions I have an error F2. I changed the toner and that does not still work... There is no message: LOAD OF the TONER. Thank you for your answer.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Sharp Master
  • 783 Answers

  • F2 with sub code 00 - Toner Sensor problem, ID pattern reading error;
  • F2 with sub code 02 - Toner Motor problem, check toner dispenser motor;
  • F2 with sub code 31 - Image Density error, Check the light level or the drum surface reflectivity;
  • F2 with sub code 32 - Drum Mark sensor, missing/dislocated mark or sensor faulty. Sensor cannot scan mark properly;
  • F2 with sub code 33 - grid voltage wrong, either too high or too low;
  • F2 with sub code 35 - grid voltage correction will not work during simulation;
  • F2 with sub code 37 - drum mark sensor adjustment required.

Posted on Feb 24, 2014

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
checkitright
  • 1362 Answers

SOURCE: F2 error



"F2-31" Image density sensor fault "F2-32" Drum mark sensor fault "F2-33" Grid voltage correction problem "F2-35" Grid voltage correction problem "F2-37" Drum mark sensor fault

Posted on Sep 03, 2008

  • 148 Answers

SOURCE: F2-02 error on Sharp AR-M237

on this code you may have to clean out the developing unit and start with fresh developer. Make sure the developer unit is not leaking from one of the bearings. You may need a tech for this one...

Posted on May 26, 2008

  • 2 Answers

SOURCE: I have a Sharp AR-507. Error F2-00. How to fix?

It could also be the sponge roller in the toner hopper. The old ones started to deteriorate after a while so sharp modified them.

Posted on Jun 17, 2009

  • 2 Answers

SOURCE: SHARP AR-287 F2-00 error code

Although this appears to be an ATC (automatic toner control) problem and it may list as such in service manual which gives brief description of error code it is often something else.
There is a sponge roller at bottom of toner that wears down considerably and when the hopper is very low or out of toner the otner light will come on(triangle of dots). The customer puts the new toner in and the sudden surge of a large amount of toner cascading into the hopper causes an excessive amount of toner to go past the sponge roller and directly into the developer unit which is directly under toner hopper.
The ATC sensor is on the bottom of developing unit and "reads" the density of the developer /toner ratio and with a very overtoned situation as the one created above you would get an F2-00 code.
What is normally done is to either dump toner out of hopper and replace sponge roller and seals or replace toner hoppers as a whole which is quicker and costs almost rh same as cahnging the sponge roller and seals is more labor intensive.
Also the developer is now contaminated with an excessive amount of toner and the recommende solutin is to replace the developer and calibrate theu service program.
This is hardley recommended by a service man unfamiliar with this mode let alone the customer. I ahve been in the Bay Ridge area for years and as a matter of fact bought an investment property thru Petses Realty. Frank

Posted on Sep 03, 2009

  • 1 Answer

SOURCE: SHARP AR 5012 developer reset

i have a sharp sf 1025 , and i want to reset developer conter? can u help me pls

Posted on Jul 17, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sharp MX-M232D: F2-40 error. I was able to scan without issues. When I inserted a Sharp Genuine Toner cartridge into the machine, I receive an F2-40 error.


Hi,
If you have reset the machine as described & then re--inserted the same toner cartridge giving you the same error code then I would suspect the CRUM chip that is installed on the toner cartridge is faulty.
If your machine is under a maintenance contract which includes the provision of toner then contact your service provider & they should replace it F.O.C. If you have purchased it yourself then contact the supplier advising them of a faulty cartridge. If you replace the toner with a new one, you must reset the machine as above before you insert the new toner.
Hope this helps.
Dave.

Oct 12, 2017 | Sharp Office Equipment & Supplies

3 Answers

I am using Sharp AR-M201 photo copier machine. I just came across a error message ` System Error F2-02 Refer to user guide' Can anyone guide me to solve this problem? Thanks K K Mendon


F2 -02 Toner supply failure
cause :-
- developer unit trouble

- Toner supply abnormality caused by
installation of unpacked toner cartridge

Dec 26, 2010 | Sharp AR-M205 Copier

1 Answer

Error code f2-04 after changing to new toner cartridge


F2 04
  • Identification error
  • Model error
  • Type error
  • Destination error
  • Data abnormality
  • Misc error

It is always recommended to use OEM toner. The toner you need if AR-310NT

Sep 24, 2009 | Sharp AR-M257 Black and White Copier

5 Answers

I have a Sharp AR-507. Error F2-00. How to fix?


It could also be the sponge roller in the toner hopper. The old ones started to deteriorate after a while so sharp modified them.

May 08, 2009 | Sharp AR-507 Copier

2 Answers

I CHANGE THE CARTRIDGE OF THE COPIER AND TURN ON IT. SO THE COPIER DISPLAY MESSAGE 2F.


i think the error your actually getting is F2. this error pertains to toner cartridge chip error. it's that little chip on at the end of the cartridge.you'll need to have that replaced.

Mar 25, 2009 | Sharp AR-M160 Laser Printer

4 Answers

F2-02 Error on Imagistics ZB35 machine


Sharp AR-5620N getting f-2 error. What is the solution

Mar 03, 2009 | Sharp AR-M237 Copier

5 Answers

F2-02 error on Sharp AR-M237


on this code you may have to clean out the developing unit and start with fresh developer. Make sure the developer unit is not leaking from one of the bearings. You may need a tech for this one...

May 23, 2008 | Sharp AR-M237 Copier

Not finding what you are looking for?

Open Questions:

See all Sharp SF-2025/2030 Copier Toner Black SF-230T1 Questions

Sharp SF-2025/2030 Copier Toner Black SF-230T1 Logo

267 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Office Equipment & Supplies Experts

Anthony Karuku

Level 2 Expert

268 Answers

amir hamza
amir hamza

Level 2 Expert

318 Answers

k24674

Level 3 Expert

8081 Answers

Are you a Sharp Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...