Error 011 roku shows error 011 will not connect to internet using wireless modem

E011 usually means that the firewall in the router is enabled. Disable the firewall , setup Roku, and then enable the firewall.

That error code is usually associated with the firewall in the wireless router. If you turn off the router firewall then the Roku should be able to access the Internet to perform the update.

You will have to either remember your password, or reset your wifi back to factory settings and set up a new password. In order to clear the "code 011" error, you will have to hold the reset button down on the Roku for at least 30 seconds to do a factory reset. But, don't do this until you get your wifi password issue squared away first.

I hope that helps.
--Robet

If you are attempting to setup your Roku player and you see a Code 011 error, this means the Roku player momentarily lost connection to the Roku update server. There may be a chance that Roku servers are not available due to a scheduled maintenance. When this happens, try again after a short period of time. Then just perform a power cycle of the Roku player with the instruction below. You should be able to continue where you left off.
To resolve this do the following:

• Power cycle the Roku player by removing the power connector from the back of the Roku player. Wait 30 seconds, then reconnect the power. Wait for the player to restart, then follow the on-screen instructions.
• If power cycling the Roku player did not resolve the error then a network power cycle might.
  • To do this remove the power connector from these devices. (note that your router and modem may be one physical unit)
  • Roku player
  • Wireless router
  • Modem
  • Wait 30 seconds then reconnect the power connectors in this order, waiting 1 minute between each device to allow it to fully boot.
    • Modem
    • Wireless router
    • Roku player
  • Follow the on-screen instructions from the Roku player and TV.

If none of the above steps worked then a reset of the Roku player may be needed. To reset the Roku player:

Find the reset button.

• Examples of where to find the reset button are below.

Press and hold the reset button for 30 seconds then release.

• The Roku player will then restart.

You may need to reset your device and you will see a reset button at back of your router so all you need is to keep holding it for 10 seconds then unplug the power jack for like 1 min and then your device shall be reset.But please make sure to backup your all settings first.

What is the exact error message??
Are you unable to connect to LAN or Internet Or Wireless network