Wurlitzer 1015 Sound will not turn up

New stylus needed, make sure you have a proper lint grabber and that you are instructed properly, when i was using 78rpm a crackely sound was associated with a very much used stylus, Replace

have you got the manual ?

The laser unit is faulty. Contact [email protected] who has a repair service.

You can get parts for One More Time at www.wurlitzer.co.uk

HI,
Here i have added picture of Wurlitzer 1015 rear side picture. from this picture you can identify which side you have to remove to see the tubes. In th picture you can see the tubes. two out put tubes. one rectifier and two pre amp tubes(black).

Wurlitzer 1015

i have the service programme ona dvd disc for the wurlitzer one more time if thats any use [email protected]

Please email me. I can help you troubleshoot over the phone. Please email [email protected].

The software is sold by Low Profile Software.

Dave F.

Hi,

On the Wurliza 1015 in the early 80's Alan Black of Sound Leisure bought the tooling to produce the 1015 jukebox He sold the rights to produce them in the USA under licence to Rowe Ami, Rock Ola under the Antique Apperatus banner and Wurliza.

I would think you may look for cabinet information from any of the above companies.

In England the manufacturing company Sound Leisure Ltd., 39 Ings Road in Leeds (founded in 1978 by Alan J. Black and Kevin E. Moss) has been known for years for its very elegant and Fuller inspired reproduction antique jukeboxes. www.soundleisure.com.

Regards
Alan Hood
ami-man
UK

Most likely the main fuse inside the wurlitzer itself - situated screwed into the lower right hand side of the amplifier panel.