LC863532c 55j2 255 chanles i want to service codes

The copier error code 551 is a fusing thermistor 1 error code.

It can mean:
1. The thermistor is not connected
2. The thermistor connector is bad

To reset this error try the code:
"Clear Mode"+107+"Clear/Stop" hold for 5s.
Turn ON and OFF the Main Switch.

If the problem persists you may need to contact a local service technician to take a look at your copier.

If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/
Service mode entry, adjust and exit procedure to many popular brand TVs are given. Never forget to exit the service mode, after all adjustments have been done.
NB: Please read and understand well, the instructions to enter the service mode, before you begin. Be very careful. Note how to "EXIT" the service mode; after entering and adjusting data. This is very important.

READ the owner manual for the default code or contact the maker.

codes is 12345 or 00000 u can use it
Default 4 Digit user code: 1234 or 0000
Default 6 Digit Security code: 123456 or 000000

Check an other setup code for your device. Some setup codes might work with certain functions. Select one setup code, which will give you maximum functionality.

Hello! Welcome to FixYa
First try Default security code of Nokia i.e 12345 or 00000.
If you have changed your code before then to get your Master code. Type *#06# at the mobile screen to know IMEI no of your mobile or open back cover and pull out the battery and see the IMEI Then Go Here.
Give your IMEI no there and calculate your master code and try it.
If it don't work then contact to Nokia service provider

Further assistance, I am here to help
Thank you for using FixYa

You can get the Code from the service provider...

how the error code E000000-0000 is solved...give the solution

Most of these codes can be autodetected by good universal remotes. In this case I would recommend www.remotes.com they should not only have a remote for this tv they would have the codes there of.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/edwy_1a56970cf1ea4620

I HAVE A SNYO KIT ( 360 CHANNEL ) USING MICROPROCESOR IC LC863532C-58E2 I WANT TO KNOW THE CODES OF SERVICE MENU & HOW TO UNLOCK TV CHANNEL