How can i disassemble the jack lalanne juicer 0003ap

You can get a tool on EBay search "jack lalanne juicer tool" hope this helps

You can find instructions on how to assemble, disassemble and clean your juicer in your manual. Manuals for the various models of the Jack LaLanne Juicers are available online here:

http://www.powerjuicer.com/power-juicer-manuals.php

Also check out the various videos posted on the site including this one of cleaning:

http://www.powerjuicer.com/power-juicer-how-to-videos.php

You can find a manual for your Jack LaLanne product online here:

http://www.powerjuicer.com/power-juicer-manuals.php

In additon to the instruction on assembly / disassembly in the manual recommend you view the How To Videos available on the site:

http://www.powerjuicer.com/power-juicer-how-to-videos.php

Thank you for using FixYa!

The manual for your Jack LaLanne Power Juicer can be found here:

http://www.powerjuicer.com/power-juicer-manuals.php

The manual contains illustrated assembly and disassembly instuctions

You may also find the How To videos to be helpful:

http://www.powerjuicer.com/power-juicer-how-to-videos.php

Manuals for the Jack LaLanne Power Juicers can be found here:

http://www.powerjuicer.com/power-juicer-manuals.php

You might take time to browse the site, you will find How To videos, manuals, Tips and recipes.

Suggest you review the series of How To videos on the Jack LaLanne website:

http://www.powerjuicer.com/power-juicer-how-to-videos.php

You will also be able to find your Operating Manual which contains illustrated Assembly and Disassembly Instructions

Jack Lalanne Juicer Manual
http://www.myeasypics.com/is.php?i=665112&img=1.jpg
http://www.myeasypics.com/is.php?i=665113&img=2.jpg
http://www.myeasypics.com/is.php?i=665114&img=3.jpg
http://www.myeasypics.com/is.php?i=665115&img=4.jpg
I hope this helps.

Jack Lalanne Juicer Manual
http://www.myeasypics.com/is.php?i=665112&img=1.jpg
http://www.myeasypics.com/is.php?i=665113&img=2.jpg
http://www.myeasypics.com/is.php?i=665114&img=3.jpg
http://www.myeasypics.com/is.php?i=665115&img=4.jpg
I hope this helps.

Just find a big wire around 1/8 diameter. Bend it and insert both ends on the blade holes. Cover the sharp blade with cloth or use leather gloves.

Take the top part of the juicer off so that just the shreder is visable. On top of the shreder are 2 small holes on either side of the blades. a handle devise with 2 pins came with the juicer. put the tool pins into the holes and twist counter clock wise. The blade will come off then rest is simple and the unit can be disassembled. If you have lost the tool disassembly will be more dificult but can still be accomplished using a cloth on top of the blades and twiting counter clock wise. Careful though or you will cut yourself