How to remove base stand of samsung t200hd - Samsung SyncMaster 204B 20.1" LCD Monitor

should have a couple of screws holing stand in place. remove screws then lift tv off of stand

Just download it from here.

You can try Samsung or manualsonline.com

First, lay your monitor on a flat surface, with the screen facing down, and the stand base oriented towards you. Then, just pull the stand off. Make sure your pulling force is parallel to the flat surface.

Good luck.

Here is the support page for the T200HD with a PDF file of the user manual. Good Luck

T200HD

A difficult one as Samsung do not recommend that this uint is wall mounted but there should be 4 screws attaching the stand to the base of the TV chasssi but if you do remove it you will end up with a gap in the cover as Samsung do not provide blanking covers to cover it up.

It's usually 2 screw at the base of the TV, at the rear. Loosen or remove the screws and the base should slip right off

GENTILITY lay that set face down on a table covered with a thick blanket. There should be 4 long threaded bolts near the bottom that fasten the legs of the stand inside the framework of the set.. Remove these and the stand should slide right out.

www.mcveyelectronics.com

Samsung wall mount bracket WMB 1900T adapts for four hole wall mounts. Fits 19" to 22" monitors. Price is $27-$42 at online stores.

there is no time to press remote keys.
Is there any other solution?
Please help...