Ltd v-200 wiring

Hi!

Contact Peavey Support peavey com Peavey com

Request from Yamaha or Google

the 153 is wired like a Les Paul or SG
2 humbucker, 2 vol, 2 tone
with the addition of a 3 way coil tap for the neck pick-up
wired similar to:
http://www.guitarelectronics.com/product/WIRING_MOD_HB0066/Guitar-Wiring-Mod-HumbuckerOFFParallel.html

It looks like you have 2 humbuckers (how many wires on each?), one 3 way selector and 1 volume and 2 tone controls, plus the output jack. Tell me how many wires on these humbuckers and what colors and I can help you wire it.

Here is the wiring diagram for a 2 humbucker, 2 volume, 2 tone, 3-way switch setup. The wires off the pickup may be a little different. Just attach the lead wire to the arm of the pot and the ground to the ground on the top of the pot. Should be very strait forward.

http://www.seymourduncan.com/pdfs/support/schematics/2h_2v_2t_3w.pdf

Go to either Fender, Gibson, or another guitar company, and look up wiring diagrams. Anything with 2 humbuckers and a switch is wired essentially the same.

Go to guitarelectronics.com they have wiring diagrams for your guitar there.

It sounds like your selector switch might be faulty. Here is the diagram:http://www.gibson.com/Files/schematics/Dot%20Studio%20sch.pdf

Match your resources of your guitar at this site to find typical schematic:

http://www.guitarelectronics.com/c=t6JiCQzmaFtGBjJUnATWv1XQ2/category/wiring_resources_guitar_wiring_diagrams/

It's wired like this: http://www.seymourduncan.com/support/wiring-diagrams/schematics.php?schematic=HSH_1v_1t_5w